Where the distance from the wheelchair to the clothes rod or shelf exceeds 10 inches (254 mm), as in closets without accessible doors, the height and depth to the rod or shelf shall comply...
Search Results "Counter Depth"
Filters
Commonly Searched Documents
-
1125B.3
-
1134A.7, Item 1
may be reduced to 36 inches (914 mm) for lavatories, cabinets, wing walls, or privacy walls located immediately adjacent to a water closet which extend no more than 24 inches (610 mm) in depth...
-
Clearance Around Base (M301.4.2 and M302.4.2)
base permitted within this clearance would be 26 inches wide maximum at the edge of the examination surface and is permitted to increase at a rate of 1 inch in width for each 3 inches in depth...
-
Part 12- Access Methods - Using External Switches
Access options Configuring Proloquo2Go for an external switch(es) Scan modes - Automatic Step Scanning and Inverse Scanning Note: There is a separate e-Learning video that provides an in-depth...
-
Nystrom Building Products MatDesign Roll-Up Mats
conditions Excellent option for installations that involve unusual shapes and sizes Water and Snow removal Specifications Rolling Load: 350 lbs per wheel 3/8" overall depth...
-
Bobrick Recessed Toilet Tissue Dispenser with Storage for Extra Roll B-663
Rough Wall Opening: 5 1⁄2" W, 5 1⁄2" H, 4" min. depth (140 x 140 x 100mm)....
-
Bobrick Recessed Toilet Tissue Dispenser with Storage for Extra Roll B-6637
Rough Wall Opening: 5 1⁄2" W, 5 1⁄2" H, 4" min. depth (140 x 140 x 100mm)....
-
GE® 27" Drop-In Electric Range JM250DFBB
Cabinet Opening 27 in Cabinet Width 27 in Net Weight 104 lb Oven Interior Dimensions (W x H x D) (in.) 19 x 15 x 18 Overall Depth...
-
Re: Section 307 Protruding Objects
The (maximum) depth of a shelf isn't noted, but you're unlikely to find many shelves less than 4" deep....
-
F205.1 General
Where two or more outlets are provided in a kitchen above a length of counter top that is uninterrupted by a sink or appliance, one outlet shall not be required to comply with 309. 4....
-
205.1 General
Where two or more outlets are provided in a kitchen above a length of counter top that is uninterrupted by a sink or appliance, one outlet shall not be required to comply with 309. 4....
-
Visual Busyness (slide 13)
So I think what you have to do is use the contrast on the edges of things to tell you where the edge of the counter is, to tell you where the floor meets the wall, to tell you when something...
-
IPS Corporation Truebro® Basin Guard® Undersink Protective Enclosures
Basin Guard can be installed where ever counter tops and sidewalls are present and the proper ADA sink is installed....
-
Neo-Metro Commercial Curved Front, Wall Mounted System M2 Basin 8980 Series
These units offer the look and feel of commercial-grade designer basins and counter tops. Each standard height washbasin complies with ANSI, UFAS and ADA requirements....
-
ALUMAT Magnetic Doors Seals for External Doors
For convenient and low-noise handling while opening the doors, the magnet counter profiles below the doors have additional insulating strips....
-
Grainger Tough Guy Stainless Steel Sanitary Napkin Receptacle, 11" Height
1609 UNSPSC# 47121702 Shipping Weight: 3.28 lbs Technical Specs Item Sanitary Napkin Receptacle Container Mounting Style Wall or Free-Standing Height 11" Container Depth...
-
Bobrick Recessed Multi-Roll Toilet Tissue Dispenser B-4388
Rough Wall Opening: 6 1⁄4" W, 11 1⁄4" H, 3 1⁄4" min. depth (160 x 285 x 85mm)....
-
Bobrick TrimLineSeries Recessed Soap Dispenser B-306
Rough Wall Opening: 8 3/8" W, 4 3/8" H, 3 7/8" min. depth (215 x 110 x 100mm)....
-
Boolee Voting Booth
fasteners are zinc plated All side panel fabric is 300 x 300 urethane-coated polyester Design Specifications All weights and measures subject to minor variations Height: 60: Depth...
-
Lateral grab bar use
Table 12 summarizes the average clear space required for our subjects to position their WMD to perform a transfer in each protocol in terms of width, depth, and angle of approach (Figure...
-
Stabilizer
Stabilizer arrives pre-mixed with ¼ inch minus aggregate and is applied at a 3-inch depth on top of the base....
-
Curb Ramps at Marked Crossings and Vehicular Lanes
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
-
Benches
Benches must have seats that are a minimum of 20 inches to a maximum of 24 inches in depth and 42 inches minimum in length....
-
307 Protruding Objects
., higher than 27 inches from the floor) and below the standard head room clearance (80 inches), are limited to a 4 inch depth....
