The rear edge of an L-shaped seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall....
Search Results "Maximum Reach Depth"
-
11B-610.3.2 L-shaped seats
-
11B-610.3.2 L-shaped seats
The rear edge of an L-shaped seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall....
-
Federal Elevator Carelift Wheelchair Lift
Features: 1000 lbs. (454 Kg.) or 1400 lbs. (635 kg) rated load 50 fpm. (0.25 m/s) maximum speed 23 ft. 3 in. (7 m) maximum travel 80″ to 84″ Melamine (1/2″) wall panels with...
-
Inpro Corporation ENDURANT® Trench Drain Receptor
The opening of this receptor is flush to the adjacent flooring to allow for easy wheelchair access with a drain that spans the length of the receptor for situations that require maximum...
-
4.7.7 Detectable Warnings
The detectable warning shall extend the full width and depth of the curb ramp....
-
Range or Cooktop: ADA Standard Section 804.6.4
The location of controls shall not require reaching across burners....
-
11B-805.6 Hand washing fixtures, lavatories and sinks
Exception 1 which states: "At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth...
-
11B-805.6 Hand washing fixtures, lavatories and sinks
Exception 1 which states: "At lavatories required to be accessible by Section 11B-213.3.4, the knee clearance shall be 27 inches (686 mm) high minimum above the finish floor or ground at a depth...
-
11B-804.6.4 Range or cooktop
The location of controls shall not require reaching across burners....
-
Approach: ADA Standard Section 904.2
the sales or service counter, locate the accessible counter close to the cash register so that a person using a wheelchair is visible to sales or service personnel and to minimize the reach...
-
11B-804.6.4 Range or cooktop
The location of controls shall not require reaching across burners....
-
How Geometry Dash Lite’s Level Design Shapes Its Addictive Challenge
Geometry Dash Lite is a deceptively simple rhythm-based platformer: the player taps to jump, avoids obstacles, and tries to reach the end of a level....
-
F228 Depositories, Vending Machines, Change Machines, and Mail Boxes
These elements are subject to requirements for operable parts in section 309, which specify location within accessible reach ranges and maximum operating forces....
-
11B-704.4.1 Height
wheelchair accessible telephone because the required 34 inches (865 mm) minimum keypad height can causes the highest operable part of the telephone, usually the coin slot, to exceed the maximum...
-
11B-704.4.1 Height
wheelchair accessible telephone because the required 34 inches (865 mm) minimum keypad height can causes the highest operable part of the telephone, usually the coin slot, to exceed the maximum...
-
6e.
Are the controls and operating mechanisms mounted no more than 54 inches above the floor for a side reach or 48 inches for a forward reach? Yes _____ No _____...
-
Trailhead Signs
minimum the following information: Trail name Length of the trail Type of surface on the trail Typical and minimum trail tread width Typical and maximum...
-
S. R. Smith Splash! Pool Lift
lift is also available in Hi/Lo, Spa, Extended Reach, Splash! 300, Splash! 300 Hi/Lo, and Splash! 300 Spa versions. The Splash! ...
-
AquaTrek2 ADA Step System
MEETS OR EXCEEDS ADA REQUIREMENTS: No Open Risers 7” Maximum Riser Height 12” Minimum Tread Depth 24” Maximum Width Between Handrails Top Landing...
-
Using the Tape Measure
A tape measure is used to measure the length, width, height, and depth of various elements including parking spaces and access aisles, routes, thresholds, doorways, and protruding objects...
-
5.2.1 Transfer Surface Size Recommendations for M301
The technical criteria do not address the overall width and depth of patient support surfaces because of the diverse shape and size of these surfaces....
-
Clearance in Base (M301.4.1 and M302.4.1)
Where the width of the examination surface is less than 36 inches, the clearance depth would be required to extend the full width of the equipment....
-
Rectangular Seats: ADA Standard Section 610.3.1
Section 610.3.1 covers the current ADA Standards for rectangular shower compartment seats.
