minimum the following information: Trail name Length of the trail Type of surface on the trail Typical and minimum trail tread width Typical and maximum...
Search Results "Maximum Reach Depth"
Commonly Searched Documents
-
Trailhead Signs
-
F228 Depositories, Vending Machines, Change Machines, and Mail Boxes
These elements are subject to requirements for operable parts in section 309, which specify location within accessible reach ranges and maximum operating forces....
-
11B-704.4.1 Height
wheelchair accessible telephone because the required 34 inches (865 mm) minimum keypad height can causes the highest operable part of the telephone, usually the coin slot, to exceed the maximum...
-
11B-704.4.1 Height
wheelchair accessible telephone because the required 34 inches (865 mm) minimum keypad height can causes the highest operable part of the telephone, usually the coin slot, to exceed the maximum...
-
11B-203.10 Raised refereeing, judging, and scoring areas
An accessible route complying with Division 4 shall be provided to the ground- or floor-level entry points, where provided, of stairs, ladders, or other means of reaching the raised elements...
- Activar JL Industries ORBIT SERIES - LOW PROFILE CABINET
- Sloan HYB-7000 Urinal
- Sloan HYB-1000 Urinal
- Sloan HYB-4000 Urinal
- Guardian Barrier-Free WideArea™ Eye/Face Wash GBF1724
-
4.7.7 Detectable Warnings
The detectable warning shall extend the full width and depth of the curb ramp....
-
Rectangular Seats: ADA Standard Section 610.3.1
Section 610.3.1 covers the current ADA Standards for rectangular shower compartment seats.
-
11B-610.3.1 Rectangular seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall....
- Mighty 400 Pool & Spa Access Lift
- Federal Elevator Carelift Wheelchair Lift
- Inpro Corporation ENDURANT® Trench Drain Receptor
-
Range or Cooktop: ADA Standard Section 804.6.4
The location of controls shall not require reaching across burners....
-
Appendix: Revised Annotated Bibliography
Data collected: seated stature; eye, shoulder, forearm, knee, toe, and maximum reach height; overhead, normal, and maximal reach; radial and overall arm length; trunk depth, and bideltoid...
-
5.2.1 Transfer Surface Size Recommendations for M301
The technical criteria do not address the overall width and depth of patient support surfaces because of the diverse shape and size of these surfaces....
-
Approach: ADA Standard Section 904.2
the sales or service counter, locate the accessible counter close to the cash register so that a person using a wheelchair is visible to sales or service personnel and to minimize the reach...
-
11B-804.6.4 Range or cooktop
The location of controls shall not require reaching across burners....
-
Using the Tape Measure
A tape measure is used to measure the length, width, height, and depth of various elements including parking spaces and access aisles, routes, thresholds, doorways, and protruding objects...
-
11B-408.4.1 Car dimensions and doors
Elevator cars shall provide a clear width 42 inches (1067 mm) minimum and a clear depth 54 inches (1372 mm) minimum....
-
Nosings: ADA Standard Section 504.5
Section 504.5 covers the current ADA Standards for stair nosings.