A clear floor or ground space complying with Section 11B-305 shall be provided in the load and unload area adjacent to the amusement ride seats designed for transfer....
Search Results "Bus Loading Zone"
-
11B-1002.5.1 Clear floor or ground space
-
American Specialties Turbo-Tuff™ Recessed Mounted Hand Dryer 0134
thermostat Owner-adjustable air speed and air temperature On/off heating options Dryer automatically shuts off after time-out when user removes hands from sensor zone...
-
What’s the difference between the Air Carrier Access Act (ACAA) and the Americans with Disabilities Act (ADA)?
., subway and bus systems). [Sec. 382.1]...
-
12143(a) General rule
discrimination for purposes of section 12132 of this title and section 794 of title 29 for a public entity which operates a fixed route system (other than a system which provides solely commuter bus...
-
DOT’s ADA Standards (2006)
are very similar to DOJ’s 2010 Standards but include unique provisions concerning: accessible route location (§206.3) detectable warnings on curb ramps (§406.8) bus...
-
§ 37.43(c)
Areas of transportation facilities that involve primary functions include, but are not necessarily limited to, ticket purchase and collection areas, passenger waiting areas, train or bus...
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
§8.32(c)
(c) This section does not require recipients to make building alterations that have little likelihood of being accomplished without removing or altering a load-bearing structural member....
-
§104.23(c)(3)
(3) This section does not require recipients to make building alterations that have little likelihood of being accomplished without removing or altering a load-bearing structural member....
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
11B-1002.6.2 Transfer height
The height of transfer device seats shall be 14 inches (356 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
3306.2 Walkways
Walkways shall be accessible in accordance with Chapter 11A or 11B as applicable, and shall be designed to support all imposed loads, and the design live load shall be not less than 150...
-
Annualized Costs to Large Transit Entities for Automated Announcement Systems
annualized costs related to the requirement that large transit entities provide automated announcement systems for stop and route identification on their large vehicles operating in fixed route bus...
-
11B-106.5 Defined terms
ACCESSIBILITY KEY STATION KICK PLATE KITCHEN OR KITCHENETTE LAVATORY MAIL BOXES MARKED CROSSING MAY MEZZANINE MULTIBEDROOM HOUSING UNIT NFPA NOSING OCCUPANT LOAD...
-
Wavlink Router And Extender Setup
Proper placement between the router and dead zones is key for best performance....
-
Are transportation operators required to retrofit their vehicles to accommodate larger and heavier wheelchairs?
No. 49 CFR Part 38 continues to require that lifts have a minimum design load of 600 pounds and the lift platform accommodates a wheelchair measuring 30 inches by 48 inches....
-
Are transportation operators required to retrofit their vehicles to accommodate larger and heavier wheelchairs?
No. 49 CFR Part 38 continues to require that lifts have a minimum design load of 600 pounds and the lift platform accommodates a wheelchair measuring 30 inches by 48 inches....
-
1002.5.1 Clear Floor or Ground Space
A clear floor or ground space complying with 305 shall be provided in the load and unload area adjacent to the amusement ride seats designed for transfer....
-
Hager Companies 6” Round ADA Actuator 2-659-0303
steel faceplate provides durability while also reducing visible deterioration caused by abrasive cleaning agents - Beveled edges - Various design options - Adjustable detection zone...
-
Hager Companies 6” Round ADA Actuator 2-659-0307
steel faceplate provides durability while also reducing visible deterioration caused by abrasive cleaning agents - Beveled edges - Various design options - Adjustable detection zone...
-
Hager Companies 4.75” Square ADA Actuator 2-659-0305
steel faceplate provides durability while also reducing visible deterioration caused by abrasive cleaning agents - Beveled edges - Various design options - Adjustable detection zone...
-
Hager Companies 6” Round ADA Actuator 2-659-0304
steel faceplate provides durability while also reducing visible deterioration caused by abrasive cleaning agents - Beveled edges - Various design options - Adjustable detection zone...
