When amusement rides are in the load and unload position, wheelchair spaces complying with Section 11B-1002.4, amusement ride seats designed for transfer complying with Section 11B-1002.5...
Search Results "Bus Loading Zone"
-
11B-206.2.9.2 Wheelchair spaces, ride seats designed for transfer, and transfer devices
-
1009.2.6 Footrests and Armrests
If provided, the armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised (load) position....
-
§ 38.113(d)(4) Exception
vehicles shall be coordinated with the platform in existing stations such that the horizontal gap shall be no greater than 4 inches and the height of the vehicle floor, under 50% passenger load...
-
105 Referenced Standards
assisted doors (105.2.1) American Society of Mechanical Engineers (ASME) for various elevators and platform lifts (105.2.2) American Society for Testing and Materials (ASTM) for use zones...
-
Alterations
If play components are relocated in an existing play area to create safe use zones, the guidelines do not apply, provided that the ground surface is not changed or extended for more than...
-
Alterations
Passenger Loading Zones Sections 209 and 503 Sales and Service Sections 227 and 904 specifically cover sales and service areas, such as check-out aisles and sales and service counters...
-
Amusement Rides with Wheelchair Spaces
If possible, designers and manufacturers should incorporate more space to enhance the ease of loading and unloading and to accommodate a greater variety of personal mobility devices....
-
§ 38.73(d)(3) Exception
vehicles shall be coordinated with the platform in new and key stations such that the horizontal gap shall be no greater than 4 inches and the height of the vehicle floor, under 50% passenger load...
-
§ 38.53(d)(3) Exception
vehicles shall be coordinated with the platform in new and key stations such that the horizontal gap shall be no greater than 4 inches and the height of the vehicle floor, under 50% passenger load...
-
§ 38.93(d)(4) Exception
vehicles shall be coordinated with the platform in new and key stations such that the horizontal gap shall be no greater than 4 inches and the height of the vehicle floor, under 50% passenger load...
-
11B-106.5 Defined terms
ACCESSIBILITY KEY STATION KICK PLATE KITCHEN OR KITCHENETTE LAVATORY MAIL BOXES MARKED CROSSING MAY MEZZANINE MULTIBEDROOM HOUSING UNIT NFPA NOSING OCCUPANT LOAD...
-
5.4.10 Transfer Support Fittings Recommendations for M301 and M302
When the transfer supports latch into a locked position, the transfer supports must meet the required load conditions without movement....
-
1002 Amusement Rides
This section also addresses access at loading and unloading areas and provides criteria for wheelchair spaces, ride seats designed for transfer, and transfer devices....
-
1132A.8.1 Lever-type hardware
or locks shall be curved with a return to within ½ inch (12.7 mm) of the door to prevent catching on the clothing of persons during egress in Group R and U Occupancies with an occupant load...
-
1009.2.4 Seat Height
of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised (load...
-
Section 2. Entrance
For purposes of these guidelines, an "entrance" does not include a door to a loading dock or a door used primarily as a service entrance, even if nonhandicapped residents occasionally use...
-
206.2.9.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
1009.2.6 Footrests and Armrests
If provided, the armrest positioned opposite the water shall be removable or shall fold clear of the seat when the seat is in the raised (load) position....
-
11B-502.3.3 Marking
The requirement that the hatching at the loading and unloading access aisle be a suitable contrasting color to the parking space is intended to ensure that the hatching is visually distinct...
-
11B-502.3.3 Marking
The requirement that the hatching at the loading and unloading access aisle be a suitable contrasting color to the parking space is intended to ensure that the hatching is visually distinct...
-
11B-502.3.3 Marking
The requirement that the hatching at the loading and unloading access aisle be a suitable contrasting color to the parking space is intended to ensure that the hatching is visually distinct...
-
3. Access Request Program
Individual requests for program access fixes will be prioritized in residential neighborhoods or that are necessary to provide access to bus stops or other forms of public transit....
-
Who Has Responsibilities under the ADA?
It applies to all programs, services, or activities of public entities, from adoption services to zoning regulation....
-
Public Sector (Government) Facilities
facilities subject to title II of the ADA except those with no more than two stories where the inaccessible story above (or below) the entry level has no public use space and an occupant load...