steel faceplate provides durability while also reducing visible deterioration caused by abrasive cleaning agents - Beveled edges - Various design options - Adjustable detection zone...
Search Results "Bus Loading Zone"
-
Hager Companies 4.75” Square ADA Actuator 2-659-0305
-
Hager Companies 6” Round ADA Actuator 2-659-0304
steel faceplate provides durability while also reducing visible deterioration caused by abrasive cleaning agents - Beveled edges - Various design options - Adjustable detection zone...
-
Hager Companies 4.75” Round ADA Actuator 2-659-0306
steel faceplate provides durability while also reducing visible deterioration caused by abrasive cleaning agents - Beveled edges - Various design options - Adjustable detection zone...
-
Hager Companies 4.75” Square ADA Actuator 2-659-0308
steel faceplate provides durability while also reducing visible deterioration caused by abrasive cleaning agents - Beveled edges - Various design options - Adjustable detection zone...
-
11B-211.2 Minimum number
Plumbing Code (CPC), Table 4-1 provides minimum plumbing fixture requirements for new buildings, and changes of occupancy or use in an existing building resulting in increased occupant load...
-
11B-211.2 Minimum number
Plumbing Code (CPC), Table 4-1 provides minimum plumbing fixture requirements for new buildings, and changes of occupancy or use in an existing building resulting in increased occupant load...
-
Fares
The system operates the same regardless of whether the paratransit trip is being provided in place of a bus or a rail trip the user cannot make on the fixed route system....
-
F206.2.8.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
206.2.9.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
STRUCTURAL IMPRACTICABILITY
Changes having little likelihood of being accomplished without removing or altering a load-bearing structural member and/or incurring an increased cost of 50 percent or more of the value...
-
11B-1009.2.4 Seat
of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the raised (load...
-
Summary of Significant Changes
: Large transit entities are required under the 2016 Non-Rail Vehicle Guidelines to provide automated stop and route announcement systems on all large vehicles operating in fixed route bus...
-
Section 37.105 Equivalent Service Standard
Engaged” System type Vehicle type/capacity Requirement Fixed route All new vehicles except auto, van with less than 8 capacity, or over the road bus...
-
§382.99(a)
carrier, you must negotiate in good faith with the airport operator of each U.S. airport described in §382.95(b) to ensure the provision of lifts for boarding and deplaning where level-entry loading...
-
4.1.3(8)(a)(i)
Public entrances are any entrances that are not loading or service entrances....
-
11B-217.4.7 Transportation facilities
In transportation facilities, in addition to the requirements of Sections 11B-217.4.1 through 11B-217.4.4, where at least one public pay telephone serves a particular entrance to a bus or...
-
1. Location
Remember, walkways include areas where people must walk to access bus stops and other public transportation stops, so, where necessary, curb ramps must also be provided to enable people...
-
Subtitle B: Public Transportation
purchased vehicles, make good faith efforts to purchase or lease accessible used buses, remanufacture buses in an accessible manner, and, provide paratransit where they operate fixed-route bus...
-
Temporary Disabilities
For example, if an individual breaks both legs and is in two casts for several weeks, becomes a wheelchair user for the duration, and the bus route that would normally take him to work is...
-
§ 37.213(a)(1)
(1) When the operator receives a request for an accessible bus or equivalent service, the operator shall complete lines 1-9 of the Service Request Form in Appendix A to this subpart....
-
T213 Seats
Comments were received from a bus manufacturer and a transit operator seeking clarification whether flip up seats used in wheelchair spaces could also be designated as priority seats....
-
Additional Protections from Discrimination
, to gain the same benefit, or to reach the same level of achievement in the most integrated setting appropriate to a particular student’s needs.117 For example, a school district’s bus...
-
About the Author
He worked as the east zone structural engineer for the Eastern Region and as a civil engineer for the Ashley and Tongass National Forests before coming to MTDC....
-
1009.2.4 Seat Height
of the lift seat shall be designed to allow a stop at 16 inches (405 mm) minimum to 19 inches (485 mm) maximum measured from the deck to the top of the seat surface when in the raised (load...
