A clear floor or ground space complying with 305 shall be provided in the load and unload area adjacent to the amusement ride seats designed for transfer....
Search Results "Bus Loading Zone"
-
1002.5.1 Clear Floor or Ground Space
-
Truck Manager 2026 Free Money and Gems Guide
Truck Manager 2026 Free Money and Gems Then I'd realize I needed to drive across what felt like three time zones to deliver beach umbrellas to some tiny coastal town....
-
Re: Point of Use Water Heaters and Knee Space
Ensuring a point-of-use water heater lacks sharp edges and sits entirely outside the required knee space zone is essential for a passing inspection....
-
Re: Point of Use Water Heaters and Knee Space
Ensuring a point-of-use water heater lacks sharp edges and sits entirely outside the required knee space zone is essential for a passing inspection....
-
4.3.11.2 Size
The total number of such 30-inch by 48-inch (760 mm by 1220 mm) areas per story shall be not less than one for every 200 persons of calculated occupant load served by the area of rescue...
-
11B-1009.2.4 Seat
of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the raised (load...
-
11B-1009.2.4 Seat
of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the raised (load...
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
1002.6.2 Transfer Height
The height of transfer device seats shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the load and unload surface....
-
1002.5.2 Transfer Height
The height of amusement ride seats designed for transfer shall be 14 inches (355 mm) minimum and 24 inches (610 mm) maximum measured from the surface of the load and unload area....
-
12185(d) Deadline
section 12186(a)(2)(B) of this title on or before the applicable deadlines specified in section 12186(a)(2)(B) of this title will result in a significant reduction in intercity over-the-road bus...
-
§ 37.33(a)
Public airports which operate fixed route transportation systems are subject to the requirements of this part for commuter bus service operated by public entities....
-
2. Priority Guidelines for Removal of Access Barriers
transportation corridors; (3) hospitals, medical facilities, assisted living facilities, and other similar facilities; (4) places of public accommodation such as commercial and business zones...
-
502.3.3 Marking
The access aisle must be striped diagonally to designate it as a no-parking zone. Advisory 502.3.3 Marking....
-
American Specialties Turbo-Tuff™ Recessed Mounted Hand Dryer 0134
thermostat Owner-adjustable air speed and air temperature On/off heating options Dryer automatically shuts off after time-out when user removes hands from sensor zone...
-
F206.2.8.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
STRUCTURAL IMPRACTICABILITY
Changes having little likelihood of being accomplished without removing or altering a load-bearing structural member and/or incurring an increased cost of 50 percent or more of the value...
-
206.2.9.2 Wheelchair Spaces, Ride Seats Designed for Transfer, and Transfer Devices
When amusement rides are in the load and unload position, wheelchair spaces complying with 1002.4, amusement ride seats designed for transfer complying with 1002.5, and transfer devices...
-
Design parameter considerations
museum staff or variety of vendor(s) to enable access at first public opening of exhibits regardless of deadlines IR emitter (or other wireless signals) with ability to adjust for narrow-zone...
-
III-7.4300 Parking
If valet parking is provided, there must be an accessible passenger loading zone....
-
11B-1009.2.4 Seat
of the lift seat shall be designed to allow a stop at 17 inches (432 mm) minimum to 19 inches (483 mm) maximum measured from the deck to the top of the seat surface when in the raised (load...
-
11B-211.2 Minimum number
Plumbing Code (CPC), Table 4-1 provides minimum plumbing fixture requirements for new buildings, and changes of occupancy or use in an existing building resulting in increased occupant load...
-
11B-211.2 Minimum number
Plumbing Code (CPC), Table 4-1 provides minimum plumbing fixture requirements for new buildings, and changes of occupancy or use in an existing building resulting in increased occupant load...
-
Re: Caution regarding minimum Aisle Widths for aisles that serve "elements on both sides"
The wording around aisles "serving elements on both sides" can definitely create confusion if it's applied to merchandising layouts rather than occupant load and egress flow associated with...
