All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
Search Results "Head End Wall"
-
2010 ADA Standards
-
104.1.1 Construction and Manufacturing Tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
-
104.1.1 Construction and Manufacturing Tolerances
All dimensions are subject to conventional industry tolerances except where the requirement is stated as a range with specific minimum and maximum end points....
-
711.3.1 Through penetrations
Through penetrations of fire-resistance-rated walls shall comply with Section 711.3.1.1 or 711.3.1.2....
-
2.2.4 Maneuverability
tasks: • 90-degree turn, • 180-degree turn with no restrictions on length of the maneuver, • 180-degree with a center barrier, • 360-degree rotation within a space with four walls...
-
Clear Ground Space [1011.2]
Outdoor rinsing showers 60 by 60 inches centered on the shower heads....
-
Salsbury Industries See Through Metal Locker Double Tier 3 Wide
height (add 6" for legs) Units have compartment sizes that are 12" wide, 36" high and 12", 15" or 18" deep Available as 1 wide or 3 wide units Each locker compartment includes 3 wall...
-
Salsbury Industries See Through Metal Locker Double Tier 1 Wide
height (add 6" for legs) Units have compartment sizes that are 12" wide, 36" high and 12", 15" or 18" deep Available as 1 wide or 3 wide units Each locker compartment includes 3 wall...
-
Salsbury Industries See Through Metal Locker Triple Tier 3 Wide
height (add 6" for legs) Units have compartment sizes that are 12" wide, 24" high and 12", 15" or 18" deep Available as 1 wide or 3 wide units Each locker compartment includes 3 wall...
-
Salsbury Industries See Through Metal Locker Triple Tier 1 Wide
height (add 6" for legs) Units have compartment sizes that are 12" wide, 24" high and 12", 15" or 18" deep Available as 1 wide or 3 wide units Each locker compartment includes 3 wall...
-
Bobrick Folding Shower Seat B-5191
Seat 18" (455mm) wide, projects 15 13/16" (400mm) from wall....
-
11B-610.3.1 Rectangular seats
The rear edge of a rectangular seat shall be 2½ inches (64 mm) maximum and the front edge 15 inches (381 mm) minimum and 16 inches (406 mm) maximum from the seat wall....
-
ADA Title II Technical Assistance Manual 1994 Supplement
These supplements are to be inserted, as appropriate, at the end of each chapter of the Manual....
-
Meeting ANSI Standard S12.60 Requirements
the wall height increases above ten feet....
-
30.1 Q. Would it be acceptable to use removable base cabinets beneath a wall-hung lavatory where a parallel approach is not possible?
A. Yes. The space under and around the cabinet should be finished prior to installation. For example, the tile or other floor finish must extend under the removable base cabinet.
-
Recessed Doors and Gates: ADA Standard Section 404.2.4.3
Section 404.2.4.3 covers the current ADA Standards for maneuvering clearances at recessed doors and gates.
-
Alteration
restoration, resurfacing of circulation paths or vehicular ways, changes or rearrangement of the structural parts or elements, and changes or rearrangement in the plan configuration of walls...
-
11B-201.3 Temporary and permanent structures
facilities covered by these requirements include, but are not limited to, reviewing stands, temporary classrooms, bleacher areas, stages, platforms and daises, fixed furniture systems, wall...
-
11B-903.6 Structural strength
Benches shall be affixed to the wall or floor....
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware. ◼...
-
11B-903.6 Structural strength
Benches shall be affixed to the wall or floor....
-
11B-201.3 Temporary and permanent structures
facilities covered by these requirements include, but are not limited to, reviewing stands, temporary classrooms, bleacher areas, stages, platforms and daises, fixed furniture systems, wall...
-
11B-804.2 Clearance
Clearances are measured from the furthest projecting face of all opposing base cabinets, counter tops, appliances, or walls, excluding hardware. ◼...
-
§ 37.91(d)
(d) Unless not practicable, a person providing intercity rail transportation shall place an accessible car adjacent to the end of a single level dining car through which an individual who...
