Is the surface for the accessible route, clear ground space and turning space compliant with ASTM F1951-99 Standard Specification for Determination of Accessibility of Surface Systems Under...
Search Results "Standing Surface"
Commonly Searched Documents
- 
    
  
  Applying the Accessibility Standards to the Plan, Installation, and Maintenance of Ground Level Accessible Routes for Playgrounds
  
 - 
    
  
  M302.2.1 Height
  
The height of the transfer surface during patient transfer shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum measured from the floor to the top of the transfer surface....
 - 
    
  
  Q2: Milling a Road Surface
  
triggers the requirement to add curb ramps if it involves work on a street or roadway spanning from one intersection to another, and includes overlays of additional material to the road surface...
 - 
    
  
  Mats
  
Recommendation: ADAAG does not contain provisions for carpet that is not permanently fixed, such as matting placed in lobbies during inclement weather. Where used, it is recommended...
 - 
    
  
  5.1.5 Floor Height
  
Where the floor at the entrance to the camp shelter is elevated above the ground surface, the floor shall be 17 (430 mm) high minimum to 19 inches (485 mm) high maximum measured from the...
 - 
    
  
  Maintenance
  
Maintenance Maintenance is one of the greatest factors affecting the accessibility of the surfaces in the sample. ...
 - 
    
  
  § 38.95(b)(6) Platform surface
  
(6) Platform surface. The lift platform surface shall be free of any protrusions over 1/4 inch high and shall be slip resistant....
 - ACCESSMAT® - EN - Beach accessibility mats
 - 
    
  
  I. Introduction to the Study
  
In addition, the ground surface must meet the ASTM F1951‒99 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment. ...
 - Sears Brands, LLC Craftsman 10 in. Digital LaserTrac® Level
 - Husky 10" Multi-Function Standard Digital Level
 - 
    
  
  ADA Gap Tool
  
ADA Gap Tool This handy tool was developed by Evan Terry Associates to assist its surveyors in measuring gaps in ground or floor surfaces....
 - 
    
  
  F206.7.4 Judicial Spaces
  
Platform lifts shall be permitted to provide an accessible route to: jury boxes and witness stands; raised courtroom stations including, judges' benches, clerks' stations, bailiffs' stations...
 - 
    
  
  206.7.4 Judicial Spaces
  
Platform lifts shall be permitted to provide an accessible route to: jury boxes and witness stands; raised courtroom stations including, judges' benches, clerks' stations, bailiffs' stations...
 - 
    
  
  11B-206.7.4 Judicial spaces
  
Platform lifts shall be permitted to provide an accessible route to: jury boxes and witness stands; raised courtroom stations including, judges’ benches, clerks’ stations, bailiffs’ stations...
 - 
    
  
  11B-206.7.4 Judicial spaces
  
Platform lifts shall be permitted to provide an accessible route to: jury boxes and witness stands; raised courtroom stations including, judges’ benches, clerks’ stations, bailiffs’ stations...
 - 
    
  
  11B-206.7.4 Judicial spaces
  
Platform lifts shall be permitted to provide an accessible route to: jury boxes and witness stands; raised courtroom stations including, judges’ benches, clerks’ stations, bailiffs’ stations...
 - 
    
  
  3.3 Guidance on the Visual Properties of Detectable Warnings
  
Two relatively dark surfaces may provide high luminance contrast, but on asphalt or other dark sidewalk surfaces (with reflectance less than 10 percent) high contrast is not always a good...
 - 
    
  
  206.7.4 Judicial Spaces
  
Platform lifts shall be permitted to provide an accessible route to: jury boxes and witness stands; raised courtroom stations including, judges' benches, clerks' stations, bailiffs' stations...
 - Steelcase Series 3 Height-Adjustable Work Surface with Crank
 - 
    
  
  804.6.5.2 Bottom-Hinged Door Ovens
  
Bottom-hinged door ovens shall have the work surface required by 804.3 positioned adjacent to one side of the door....
 - 
    
  
  804.6.5.2 Bottom-Hinged Door Ovens
  
Bottom-hinged door ovens shall have the work surface required by 804.3 positioned adjacent to one side of the door....
 - 
    
  
  11B-1008.2.6.2 Use zones
  
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition)....
 - 
    
  
  11B-1008.2.6.2 Use zones
  
Ground surfaces located within use zones shall comply with ASTM F 1292 (1999 edition or 2004 edition)....