Primary Function: Upper Body + Stretch and Flexibility Inground Mount: 48978 Surface Mount: 48979 Number of Users: 3 Dimensions: 106”L x 32”W x 61”H or (270cm...
Search Results "Minimum Dimension"
-
Xccent Tai Chi Double Hand Bike Combo
-
Bobrick MatrixSeries Seat-Cover Dispenser B-5221
Allow 5" (125mm) minimum clearance from bottom of dispenser to top of any horizontal projection for filling dispenser from below unit....
-
Toe Clearance: ADA Standard Section 604.8.1.4
Section 604.8.1.4 covers the current ADA Standards for toe clearance at wheelchair accessible compartments.
-
Dispensers: ADA Standard Section 604.7
Section 604.7 covers the current ADA Standards for toilet paper dispensers.
-
11B-411.2.2.1 Visible identification
The identification fixture shall be 80 inches (2032 mm) minimum above the finish floor or ground to the bottom of the fixture....
-
11B-411.2.2.1 Visible identification
The identification fixture shall be 80 inches (2032 mm) minimum above the finish floor or ground to the bottom of the fixture....
-
Wagner Instruments Mark-10 M4 Digital Force Gauge
Statistical analysis - minimum, maximum, mean & standard deviation....
-
11B-219.3 Receivers
The minimum number of receivers to be provided shall be equal to 4 percent of the total number of seats, but in no case less than two....
-
11B-219.3 Receivers
The minimum number of receivers to be provided shall be equal to 4 percent of the total number of seats, but in no case less than two....
-
11B-809.1.2 Viewing devices
with a viewing device for a standing person, the primary entry door to a residential dwelling units with mobility features shall also provide a lower viewing device 42 inches (1067 mm) minimum...
-
11B-407.2.2.2 Visible signals
Visible signal fixtures shall be centered at 72 inches (1829 mm) minimum above the finish floor or ground....
-
Doors: ADA Standard Section 604.8.2.2
Section 604.8.2.2 covers the current ADA Standards for ambulatory accessible compartment doors.
-
11B-407.2.2.2 Visible signals
Visible signal fixtures shall be centered at 72 inches (1829 mm) minimum above the finish floor or ground....
-
The ADA Standards for Accessible Design (the ADA Standards)
The ADA Standards identify what features need to be accessible, set forth the number of those features that need to be made accessible, and then provide the specific measurements, dimensions...
-
Sections 4.8.5 and 4.9.4
An exception permits the distance between the horizontal projections and the bottom of the gripping surface to be reduced by 1/8 inch for each ½ inch of additional handrail perimeter dimension...
-
Water Closet Centerline and Seat Height
Water closets can be located so that this dimension is met on either the left side or the right side of the fixture....
-
611 Washing Machines and Clothes Dryers
This dimension stems from specifications for obstructed side reaches (308.3)....
-
13. Do the provisions for openings in floor and ground surfaces in Section 302.3 apply to walking surfaces in play areas?
If gratings or openings have elongated openings, they must be placed so the long dimension is perpendicular to the dominant direction of travel....
-
COST OF EQUIPMENT
COST OF EQUIPMENT Table 1: Cost of Equipment Configurations Dimensions Price Range Average Price Price Increase Configuration #1:...
-
Supporting Documents for the Medical Diagnostic Equipment Accessibility Standards Advisory Committee Report
Subcommittee Report - Imaging Equipment Subcommittee Report - Mammography Subcommittee Report - Stretchers Subcommittee Report - Weight Scales IDeA Center Memo – Transfer Surface Dimensions...
-
T302.3 Openings
Elongated openings shall be placed so that the long dimension is perpendicular to the dominant direction of travel. EXCEPTIONS: 1....
-
Shape and Diameter
The 1½ inch clearance between walls and handrails is an absolute dimension; it provides knuckle clearance while preventing entrapment of the arm for people who lean on rails with their forearm...
-
4.10.4 HALL LANTERNS
(2) Visual elements shall be at least 2-1/2 in (64 mm) in the smallest dimension. (3) Signals shall be visible from the vicinity of the hall call button....
-
11B-812.10.4 Location
Where the long dimension of a vehicle space is parallel to the vehicular way, the EV charger shall be adjacent to, and 48 inches (1219 mm) maximum from the head end or foot end of the vehicle...
