section requires a clear ground space 36 inches minimum by 48 inches minimum positioned for either a forward or parallel approach to be provided at each distinct viewing location, and one full...
Search Results "Full Length Mirror"
Filters
Commonly Searched Documents
-
1015.2 Clear Ground Space
-
Section 37.71 Purchase or Lease of New Non-Rail Vehicles by Public Entities Operating Fixed Route Systems
The public entity also must include a full justification for the assertion that a delay in the bus procurement sufficient to obtain a lift-equipped bus would significantly impair transportation...
-
Q3: Roadway Resurfacing Alteration Project and Curb Ramp Improvements
Q3: If a roadway resurfacing alteration project does not span the full width of the road, do I have to put in curb ramps?...
-
Section 36.201(a) (Preamble, Section-by-Section Analysis)
Section 36.201(a) contains the general rule that prohibits discrimination on the basis of disability in the full and equal enjoyment of goods, services, facilities, privileges, advantages...
-
3. MDE Advisory Committee Approach
An Editorial Subcommittee drafted this report; the full Committee requested revisions after its review in mid-June 2013 (teleconference)....
-
Section 36.201(a) (Section-By-Section Analysis and Response to Comments)
Section 36.201(a) contains the general rule that prohibits discrimination on the basis of disability in the full and equal enjoyment of goods, services, facilities, privileges, advantages...
-
Vehicle Parking
Even when conditions for exception are numerous and extreme, at least 20 percent of parking areas must be full width....
-
8. Providing Qualified Readers
For example: A court has held under the Rehabilitation Act that it was not an undue hardship for a large state agency to provide full-time readers for three blind employees, in view of its...
-
General: ADA Standard Section 205.1
Section 205.1 of the ADA Standards covers information on scoping requirements for operable parts in the most current ADA Standards.
-
11B-407.2.3.1 Floor designation
The outside diameter of the star shall be 2 inches (51 mm) and all points shall be of equal length. Raised characters, including the star, shall be white on a black background....
-
11B-1007.2 Accessible routes
Ramp landing length specified by Section 11B-405.7.3 shall be permitted to be 48 inches (1219 mm) long minimum....
-
607.2 Clearance
Clearance in front of bathtubs shall extend the length of the bathtub and shall be 30 inches (760 mm) wide minimum....
-
403.5.1 Clear Width
EXCEPTION: The clear width shall be permitted to be reduced to 32 inches (815 mm) minimum for a length of 24 inches (610 mm) maximum provided that reduced width segments are separated by...
-
406.4 Landings
The landing clear length shall be 36 inches (915 mm) minimum. The landing clear width shall be at least as wide as the curb ramp, excluding flared sides, leading to the landing....
-
11B-403.7 Continuous gradient
All walks with continuous gradients shall have resting areas, 60 inches (1524 mm) in length, at intervals of 400 feet (121,920 mm) maximum....
-
R304.2.2 Running Slope
The running slope of the curb ramp shall be 5 percent minimum and 8.3 percent maximum but shall not require the ramp length to exceed 4.5 m (15.0 ft)....
-
810.2.2 Dimensions--Modification to 810.2.2 of Appendix D to 36 CFR Part 1191
810.2.2 Dimensions--Modification to 810.2.2 of Appendix D to 36 CFR Part 1191 Bus boarding and alighting areas shall provide a clear length of 96 inches (2440 mm), measured perpendicular...
-
Regulatory Impact Analysis.
A full benefit-cost analysis is required of any regulatory action that is deemed to be significant--that is, a regulation that will have an annual effect of $100 million or more on the economy...
-
Regulatory Impact Analysis.
A full benefit-cost analysis is required of any regulatory action that is deemed to be significant--that is, a regulation that will have an annual effect of $100 million or more on the economy...
-
Armor-Tile Tactile Systems Surface Applied Systems Installation Video
Our truncated dome tactile systems are designed with safety and convenience in mind and are in full compliance with the Americans With Disabilities Act (ADA) and the State of California...
-
13. What if I need an accommodation for the mediation?
for accommodations for people with disabilities, such as arranging accessible locations for mediations, providing sign language interpreters, and arranging other accommodations to ensure full...
-
Technically Infeasible
that is an essential part of the structural frame; or because other existing physical or site constraints prohibit modification or addition of elements, spaces, or features that are in full...
-
404.3 Automatic and Power-Assisted Doors and Gates
Full-powered automatic doors shall comply with ANSI/BHMA A156.10 (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
M301.2.2, M302.2.2 Transfer Size
This transfer surface is located on the longitudinal (long) side of the stretcher—either right or left side Rationale: Based upon full committee discussion and harmonization with Exam...