Push panel door covers waste Hinges: Heavy duty, full length, stainless steel piano type hinge. Lock: Pin tumbler commercial quality keyed like all other AJW cabinets....
Search Results "Full Length Mirror"
Filters
Commonly Searched Documents
-
AJW Architectural Products U6084 Unidoor Folded Towel Dispenser & Waste Receptacle Combination - Recessed
-
AJW Architectural Products U683 Dual Stall Toilet Tissue Dispenser & Sanitary Napkin Disposal - Partition Mounted
Hinges: All hinges are full length, heavy duty, stainless steel piano type hinges....
-
Hadrian Inc. Corridor Lockers
Rigid Door Construction Doors feature a full 1” (25 mm) thick double pan welded box design for improved rigidity and durability. 1” (25 mm) thick cell honeycomb is bonded...
-
AJW Architectural Products U684 Series Dual Toilet Tissue Dispenser & Sanitary Napkin Disposal - Recessed
Hinges: All hinges are full length, heavy duty, stainless steel piano type hinges. Collars: #22 ga stainless steel finished to match cabinet....
-
Gangway Slope and Rise Exceptions
As a minimum however, gangways must be designed to provide for a maximum 1:12 (8.33%) slope but are not required to be longer than 80 feet in length....
-
Curb Ramps at Marked Crossings and Vehicular Lanes
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
-
Obstacles [1016.5]
Frequent obstacles and obstacles that cross the full width of an ORAR can make travel difficult for people using mobility devices....
-
Documenting Exceptions and Notifying the U.S. Access Board About Exemptions
Access Board About Exemptions When a condition for an exception prohibits full compliance with a specific technical requirement on a section of trail as allowed in General Exception 1, document...
-
Tactile Models with Audio Description
The results reported from the “Tactile Talking Fish Project” showed that participants were able to correctly answer fact based questions about the types of fish, etc. when presented with full...
-
904.4.1 Parallel Approach
A clear floor or ground space complying with 305 shall be positioned for a parallel approach adjacent to the 36 inch (915 mm) minimum length of counter....
-
406.4 Landings
The landing clear length shall be 36 inches (915 mm) minimum. The landing clear width shall be at least as wide as the curb ramp, excluding flared sides, leading to the landing....
-
904.4 Sales and Service Counters
shall be permitted to have a portion which is 24 inches (610 mm) long minimum complying with 904.4.1 provided that the required clear floor or ground space is centered on the accessible length...
-
904.4.1 Parallel Approach
A clear floor or ground space complying with 305 shall be positioned for a parallel approach adjacent to the 36 inch (915 mm) minimum length of counter....
-
407.12.3.1 Unobstructed Forward Reach (Section-by-Section Analysis)
An unobstructed forward reach, for purposes of this section, occurs when the operable part is located at the leading edge of the maximum protrusion within the length of the vertical reference...
-
A4.8.2 SLOPE AND RISE
The ability to manage an incline is related to both its slope and its length....
-
§ 38.23(b)(6) Platform surface
clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the platform surface to 30 inches above the platform, and a minimum clear length...
-
11B-405.9.2 Curb or barrier
To prevent wheel entrapment, the curb or barrier shall provide a continuous and uninterrupted barrier along the length of the ramp....
-
§ 38.83(b)(6) Platform surface
clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches above the surface, and a minimum clear length...
-
§ 38.125(b)(6) Platform surface
clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches above the surface, and a minimum clear length...
-
§ 38.95(b)(6) Platform surface
clear width of 28 1/2 inches at the platform, a minimum clear width of 30 inches measured from 2 inches above the lift platform surface to 30 inches above the surface, and a minimum clear length...
-
11B-405.9.2 Curb or barrier
To prevent wheel entrapment, the curb or barrier shall provide a continuous and uninterrupted barrier along the length of the ramp....
-
404.3 Automatic and Power-Assisted Doors and Gates
Full-powered automatic doors shall comply with ANSI/BHMA A156.10 (incorporated by reference, see "Referenced Standards" in Chapter 1)....
-
11B-502.1 General
Exception: Where parking spaces or access aisles are not adjacent to another parking space or access aisle, measurements shall be permitted to include the full width of the line defining...
-
TECHNICALLY INFEASIBLE
that is an essential part of the structural frame, or because other existing physical or site constraints prohibit modification or addition of elements, spaces, or features which are in full...
