A recess length of least 60 inches long is required where the recess is 15 inches or more in depth....
Search Results "Segment Length"
-
Clear Floor Space [4.2.4]
-
4.21.2 Size and Clearances
guidelines for roll-in shower stalls are based on residential size fixtures (30" x 60" minimum or the space used by a standard residential tub/shower unit) and spaces (30" minimum depth by the length...
-
4.20.2 Floor Space
The amount of clear floor space in front of a bathtub required by ADAAG (30"-48" min depth depending on the direction of travel by the length of the tub including a seat at the head of the...
-
Slope [§405.2] and Cross Slope [§405.3]
Slope [§405.2] and Cross Slope [§405.3] Slope represents the proportion of vertical rise to horizontal length and is specified in the Standards as a ratio (e.g., 1:12)....
-
EFFECTIVE COMMUNICATION DURING FACE-TO-FACE SERVICES
The determination shall take into account the nature, circumstances, length, complexity, and importance of the communication, as well as the communication skills of the person with a disability...
-
5.4.4 Transfer Support Distance from Transfer Surface Recommendations for M301 and M302
The transfer support would extend horizontally the entire depth of the transfer surface and would be 15 inches minimum in length....
-
Trailhead Signs
People have made it clear that they want information about trails, including length, grade, and so forth, so that they can make their own decisions about which trail is appropriate for the...
-
Tork Image Design™ Matic® Hand Towel Roll Dispenser with Intuition® Sensor
Easy to use controls allow for sheet length adjustments. LED refill and low battery light indicators. Touch-free delivery of each soft towel enables hygiene at it’s comforting best....
-
PUSHLiving Photos
Why is a small, yet powerful and growing segment of society not being seen or represented as customers?...
-
Magnuson Group TERTIO Wall Coat Racks
Includes 10 self-aligning dark gray nylon hangers on 40 inch length. Dark Gray powder coat finish with Satin Aluminum....
-
11B-205.1 General
Where two or more outlets are provided in a kitchen above a length of counter top that is uninterrupted by a sink or appliance, one outlet shall not be required to comply with 309....
-
11B-205.1 General
Where two or more outlets are provided in a kitchen above a length of counter top that is uninterrupted by a sink or appliance, one outlet shall not be required to comply with 309....
-
(1) Transfer Surface Location for Diagnostic Equipment Used in the Supine, Prone, or Side-lying Position
Additionally, a transfer approach at the foot location may not be practical for many people with disabilities who would have to move themselves or be moved across a significant length of...
-
4.1 Wheeled Mobility Device Dimensions
.* Unoccupied Width 660 X 660 X Unoccupied Length 1065 X...
-
Omnia Industries Inc. Interior Modern Lever Latchset - Solid Brass No.225
Interior Modern Lever Latchset - Solid Brass Dimensions: 2-3/4" Projection x 5-1/8" Length Finishes: US10B, US15, US26, US26D Notes: Specify RH or LH. Shown in US15...
-
Omnia Industries Inc. Interior Modern Lever Latchset with Modern Round Rose - Solid Brass No.930MD
Interior Modern Lever Latchset with Modern Round Rose - Solid Brass Dimensions: 2-1/2" Projection x 4-3/4" Length Finishes: US3, US10B, US14, US15, US26, US26D, TB...
-
Magnuson Group CLM Series Coat Rack
Available in 2, 3, or 4 foot lengths....
-
American Specialties Automatic Roll Paper Towel Dispenser and Waste Receptacle 04692A
Proximity sensing no-touch unit dispenses a pre-set length per cycle from 8" or 9" (205 or 230 mm) wide, 800' (244 m) long rolls. Battery operated (4) D-size....
-
Top Landings
Curb ramps must be connected by an accessible route which, in effect, requires space at least 36 inches in length at the top of curb ramps....
-
Sharing an Access Aisle
Requirements for access aisles in section 502.3 address width, length, marking, and location. Two spaces are permitted to share an access aisle....
-
Elevated Accessible Routes
A typical elevated accessible route might include the following: 36-inch (915 mm) clear width 32-inch (815 mm) narrowed width permitted for 24-inch (610 mm) length to accommodate...
-
Teeing Grounds
A rectangular area usually two club-lengths in depth, the teeing ground’s borders are defined by the outside limits of two “tee-markers.”...
-
Handrails [4.8.5]
Handrails are required on both sides for ramps with a rise more than 6 inches or a horizontal length more than 72 inches....
-
2.2.4 Maneuverability
2.2.4 Maneuverability WhMD users were video recorded while completing the following tasks: • 90-degree turn, • 180-degree turn with no restrictions on length of the maneuver,...
