The long dimension of the clear space shall be roughly perpendicular to the length of the bench....
Search Results "Segment Length"
Filters
Commonly Searched Documents
-
4.4.4 Clear Floor or Ground Space
-
The SmartWheel
The SmartWheel is a wheelchair - mounted device for measuring propulsion parameters that can be used to compute forces, acceleration, rate of rise, velocity, stroke length, and other aspects...
-
Features of Accessible Parking Spaces for Cars
Access aisle of at least 60-inch width must be level (1:50 maximum slope in all directions), be the same length as the adjacent parking space(s) it serves and must connect to an accessible...
-
T103 Definitions
“Large non-rail vehicles” are vehicles more than 25 feet in length, as measured from standard bumper to standard bumper, and “small non-rail vehicles” are vehicles equal to or less than...
-
Applying the Forest Service Trails Accessibility Guidelines
It may, however, apply to new segments that pass through developed areas....
-
Landscape Forms Inc. Redline Bench Collection
3/4 inch cut steel Steel seat panel is laser cut and features perforations for heat release Seat panels are bolted to frame with stainless steel fasteners Available in 48" or 70" length...
-
5.4.4 Transfer Support Distance from Transfer Surface Recommendations for M301 and M302
The transfer support would extend horizontally the entire depth of the transfer surface and would be 15 inches minimum in length....
-
Trailhead Signs
People have made it clear that they want information about trails, including length, grade, and so forth, so that they can make their own decisions about which trail is appropriate for the...
-
Southwest Center for Independence - Durango, Cortez, CO
We believe in an inclusive community because improving things for one segment of the population enriches everyone’s lives. ...
-
Table Surface Height
Persons with disabilities considered the 34 inch maximum height too high for surfaces used for any length of time....
-
604.5.2 Rear Wall
The rear grab bar shall be permitted to be 24 inches (610 mm) long minimum, centered on the water closet, where wall space does not permit a length of 36 inches (915 mm) minimum due to the...
-
5.4.5.1 Transfer and Positioning Support Position Recommendation for Imaging Equipment
A positioning support will extend horizontally along the side of the patient scanning/imaging bed/table and be 12 - 16 inches in length and 3 - 6 inches above the transfer surface....
-
7.2.2.1 Determining Impracticability
One or more conditions for an exception exist that result in significant deviations from the technical provisions of section 7.4.1 through 7.4.8 for over 15 percent of the length of the...
-
Parking Spaces [4.6.3]
The length of accessible spaces is not specified. Access aisles must be as long as the parking space....
-
Clear Floor Space [4.2.4]
A recess length of least 60 inches long is required where the recess is 15 inches or more in depth....
-
4.21.2 Size and Clearances
guidelines for roll-in shower stalls are based on residential size fixtures (30" x 60" minimum or the space used by a standard residential tub/shower unit) and spaces (30" minimum depth by the length...
-
4.20.2 Floor Space
The amount of clear floor space in front of a bathtub required by ADAAG (30"-48" min depth depending on the direction of travel by the length of the tub including a seat at the head of the...
-
Slope [§405.2] and Cross Slope [§405.3]
Slope [§405.2] and Cross Slope [§405.3] Slope represents the proportion of vertical rise to horizontal length and is specified in the Standards as a ratio (e.g., 1:12)....
-
EFFECTIVE COMMUNICATION DURING FACE-TO-FACE SERVICES
The determination shall take into account the nature, circumstances, length, complexity, and importance of the communication, as well as the communication skills of the person with a disability...
-
11B-205.1 General
Where two or more outlets are provided in a kitchen above a length of counter top that is uninterrupted by a sink or appliance, one outlet shall not be required to comply with 309....
-
Landscape Forms Inc. Scarborough Bench Collection
., 72in. or 96in. lengths. Backless bench in 48in., 72in. or 96in. lengths. Horizontal strap or woven metal seat....
-
Omnia Industries Inc. Interior Modern Lever Latchset - Stainless Steel No.47
Interior Modern Lever Latchset - Stainless Steel Dimensions: 3" Projection x 5- 1/2 " Length, 11/16" Lever Diameter Finishes: US32D...
-
4.1 Wheeled Mobility Device Dimensions
.* Unoccupied Width 660 X 660 X Unoccupied Length 1065 X...
-
(1) Transfer Surface Location for Diagnostic Equipment Used in the Supine, Prone, or Side-lying Position
Additionally, a transfer approach at the foot location may not be practical for many people with disabilities who would have to move themselves or be moved across a significant length of...
