Search Results "Grab Bar Height"
Commonly Searched Documents
- 606.3 Lavatory Height
-
A5.1 General
This section requires that where such a dining counter is provided, a portion of the counter shall be at the required accessible height....
-
The Brewer Company, LLC
for adjustable height transfer surfaces....
-
4.8.5(5)
(5) Top of handrail gripping surfaces shall be mounted between 34 in and 38 in (865 mm and 965 mm) above ramp surfaces.
-
4.9.4(5)
(5) Top of handrail gripping surface shall be mounted between 34 in and 38 in (865 mm and 965 mm) above stair nosings.
- Mockett TLRAL27 Roma Series Adjustable Table Leg
-
Bed Height Fact Sheet
Hotels need to adopt the recommended bed height range so individuals can safely transfer to and from the bed....
-
Chapter 4: Implications for standards and design
[See subsections ...]
-
4.30.6 Mounting Location and Height
4.30.6 Mounting Location and Height. Where permanent identification is provided for rooms and spaces, signs shall be installed on the wall adjacent to the latch side of the door....
-
4.1.2 Surface Design of Examination Tables and Chairs
Thus, contouring must be addressed in considering minimum height standards for accessibility of transfer surfaces (Section 5.1.4)....
- Access Board: Standard Roll In Shower Stalls
-
Museum Gift Shop
The 42" height of the main cashier counter and the 42 1/2" height of the second cashier counter exceed the maximum 36" allowable height above the finished floor....
-
Parallel Approach to Kitchen Sinks
This exception also applies to wet bars....
-
4.30.6 MOUNTING LOCATION AND HEIGHT
Interior signage shall be located alongside the door on the latch side and shall be mounted at a height of between 54 in and 66 in (1370 mm and 1675 mm) above the finished floor....
-
§ 38.113(d)(2) Exception
New cars operating in existing stations may have a floor height within plus or minus 11/2 inches of the platform height....
-
Handrails
...are there handrails on both sides of the stair at a uniform height of 34"-38" above the front edge of the step?...
-
Q1.) When a ramp has a maximum slope of 1:12 or 8.33%, is that considered a range of from 0% to 8.33% which would allow no slope greater than 8.33% or is that a simple maximum which would allow a tolerance above 8.33%? Similarly, is a cabinet countertop that can be no higher than 34” AFF a range of from 0” to 34” AFF with no additional height allowed, or is a tolerance allowed for variations in the floor surface or cabinet construction?
A1.) The consistent technical assistance on this question has been that both are subject to tolerances.
- Diversified Woodcrafts 9010 ARM Lab Table Accessory
- GPK Modular QuadDesk
- Delta Two Handle Blade Bar/Prep Faucet 2171LF-WBHHDF
-
Conclusions
The results of the expert review of the literature highlight the need for future studies particularly as it relates to how environmental factors such as height and gap distances, use of...
-
226 and 902 Dining Surfaces and Work Surfaces
226 and 902 Dining Surfaces and Work Surfaces Section 226.1 of the 2010 Standards require that where dining surfaces are provided for the consumption of food or drink, at least...
-
1018.2 Connections
Beach access routes shall connect an entry point to the beach to the: 1. High tide level at tidal beaches; 2. Mean high water level at river beaches; or 3. Normal...