When cast - in - place exterior stairs are measured according to Section 1.1.17 the requirements of the local building code shall govern tolerances....
Search Results "Tape Measure"
-
1.2.8 Exterior stairs, cast - in - place
-
11B-1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (279 mm) minimum and 18 inches (457 mm) maximum measured to the top of the surface from the ground or floor surface....
-
§ 38.31(a)
(a) Any stepwell or doorway immediately adjacent to the driver shall have, when the door is open, at least 2 foot-candles of illumination measured on the step tread or lift platform....
-
11B-1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (279 mm) minimum and 18 inches (457 mm) maximum measured to the top of the surface from the ground or floor surface....
-
1008.3.1.2 Height
The height of transfer platforms shall be 11 inches (280 mm) minimum and 18 inches (455 mm) maximum measured to the top of the surface from the ground or floor surface....
-
Introduction
True “construction industry tolerances” as defined by the ADA Standards, should not be confused with another concept that we call “Acceptable Measurements.” ...
-
Conclusions
Our analysis based on static anthropometry measurements. It focuses solely on the adequacy of these transfer surface dimensions for a static seating surface....
-
1013.3 Height
Required guards shall not be less than 42 inches (1067 mm) high, measured vertically as follows: 1. From the adjacent walking surfaces; 2. ...
-
Near-Future Research Needs
providing the groundwork to support expanded anthropometric surveys in the future by establishing sampling strategies, and standardizing measuring and data handling procedures....
-
3. Terminology
3.1 Definitions: 3.1.1 Terminology used in this practice conforms to the definitions included in Terminology E867. 3.1.1.1 longitudinal profile measurement, n—a series of elevation...
-
1015.3 Height
Required guards shall not be less than 42 inches (1067 mm) high, measured vertically as follows: From the adjacent walking surfaces....
-
Better Living Curve Soap and Shower Dispenser 3
and chambers pop out for easy refilling Smooth, reliable pumps have a Lifetime Warranty Installs in minutes without tools, using waterproof silicone adhesive and 2-way tape...
-
Better Living Classic Soap Dispenser 1
chamber pops out for easy refilling Smooth, reliable Dispenser™ pump has a Lifetime Warranty Installs without tools in minutes with waterproof silicone adhesive and 2-way tape...
-
Better Living UNO Soap Dispenser
dispenser can be mounted either in the corner or flat on a wall Smooth, reliable Dispenser™ pump has a Lifetime Warranty Installs in minutes without tools, using 2-way tape...
-
Better Living Curve Soap Dispenser 1
off the wall for easy refilling Smooth, reliable Dispenser™ pump has a Lifetime Warranty Installs in minutes without tools, using waterproof silicone adhesive and 2-way tape...
-
Better Living Ulti-Mate Soap and Shower Dispenser 3 with Mirror
hang razors and shower puffs Smooth, reliable Dispenser™ pumps have a Lifetime Warranty Installs in minutes without tools, using waterproof silicone adhesive and 2-way tape...
-
Better Living Signature Soap Dispenser 1
Elegant fluted glass look chamber Smooth, reliable Dispenser™ pump has a Lifetime Warranty Installs in minutes without tools, using waterproof silicone adhesive and 2-way tape...
-
Better Living Clear Choice Soap Dispenser 1
room Soap chamber lifts off the wall for easy refilling Smooth, reliable Dispenser™ pump has a Lifetime Warranty Installs in minutes without tools, using 2-way tape...
-
SafePath EZCurb™ Wheelchair Ramps - Vertical Barrier Removal
Reflective tape is provided on the top of all curb sides to alert users of the vertical edge of each ramp. These are available in red or safety yellow....
-
11B-603.6 Guest room toilet and bathing rooms
that are not required to provide mobility features complying with Section 11B-806.2 shall provide all toilet and bathing fixtures in a location that allows a person using a wheelchair measuring...
-
1009.4.2 Height
The height of the transfer wall shall be 16 inches (405 mm) minimum and 19 inches (485 mm) maximum measured from the deck. Figure 1009.4.2 Transfer Wall Height...
-
Are transportation operators required to retrofit their vehicles to accommodate larger and heavier wheelchairs?
No. 49 CFR Part 38 continues to require that lifts have a minimum design load of 600 pounds and the lift platform accommodates a wheelchair measuring 30 inches by 48 inches....
-
§ 35.150(b)(5) Exemption for small facilities
For measures taken to comply with the program accessibility requirements of this section, existing facilities shall comply with the applicable requirements for alterations in § 35.151 of...
-
Are transportation operators required to retrofit their vehicles to accommodate larger and heavier wheelchairs?
No. 49 CFR Part 38 continues to require that lifts have a minimum design load of 600 pounds and the lift platform accommodates a wheelchair measuring 30 inches by 48 inches....
