Metal measuring tapes are the most commonly used tools for measuring distances. They are inexpensive, easy to use, and are available in English or metric units....
Search Results "Tape Measure"
-
Metal measuring tapes
-
1. Measuring Tape
A metal measuring tape is an essential tool for a successful survey because many of the accessibility requirements concern the width, height, or depth of various features....
-
2. Using the Tape Measure
Using the Tape Measure A metal tape measure is needed to measure the length, width, height, and depth of various elements....
-
Using the Tape Measure
A tape measure is used to measure the length, width, height, and depth of various elements including parking spaces and access aisles, routes, thresholds, doorways, and protruding objects...
-
Taking Measurements
Taking Measurements Sloped Surfaces One way to measure slope is to use a 24-inch level with leveling bubble and a tape measure....
-
Measuring Door Openings
Special care is needed when measuring the clear opening of a doorway. To measure the clear opening of a standard hinged door, open the door to 90 degrees....
-
I. Required Survey Tools
The following tools will be required to allow you to accurately complete the ADA Checklist for New Lodging Facilities: A. 12' Stiff Metal Tape Measure B. 24" Long Builders' Level (Square...
-
Performance and the Surface Deficiency Score
A digital level and tape measure were used to identify instances along the accessible routes and at clear floor spaces where the surface running slope exceeded 1:16 (6.25%); the cross slope...
-
D. What tools are needed to conduct a survey and how do you use them?
The following are the standard tools that the Civil Rights Division uses in conducting its surveys under Project Civic Access: a metal measuring tape that is at least 25-feet long...
-
1. Sloped Surfaces
Another way to measure slope that requires more effort is to use a 24-inch level with leveling bubble and a metal tape measure....
-
4. Assess During the Planning, Installation and Maintenance Phases
A digital level can be used to measure the running slope and cross slope....
-
Measuring instruments and accuracy
Measuring instruments and accuracy There are many instruments that are currently available for measuring distances and angles as well as the surface roughness of accessible elements....
-
Some existing measurement protocols
Some existing measurement protocols Currently there are no generally accepted measurement protocols for determining the slope, flatness, or waviness of floor surfaces in terms of accessibility...
-
1.1.1 Measurement tools
Because this is not realistic in construction, a tape measure with 1/16 in. divisions is a reasonable compromise for inch - pound units....
-
R103.3 Units of Measurement
R103.3 Units of Measurement. Measurements are stated in metric and U.S. customary units....
-
M101.7 Units of Measurement
Measurements are stated in U.S. customary and metric units....
-
E101.4 Units of Measurement
Measurements are stated in metric and U.S. customary units....
-
C101.4 Units of Measurement
Measurements are stated in metric and U.S. customary units....
-
E101.4 Units of Measurement
Measurements are stated in metric and U.S. customary units....
-
C101.4 Units of Measurement
Measurements are stated in metric and U.S. customary units....
-
11B-308.1.2 Electrical receptacle outlets
Electrical receptacle outlets on branch circuits of 30 amperes or less and communication system receptacles shall comply with Section 11B-308 except the low reach shall be measured to the...
-
11B-308.1.2 Electrical receptacle outlets
Electrical receptacle outlets on branch circuits of 30 amperes or less and communication system receptacles shall comply with Section 11B-308 except the low reach shall be measured to the...
-
11B-308.1.1 Electrical switches
of a room or area to control lighting and receptacle outlets, appliances or cooling, heating and ventilating equipment, shall comply with Section 11B-308 except the low reach shall be measured...
-
11B-308.1.1 Electrical switches
of a room or area to control lighting and receptacle outlets, appliances or cooling, heating and ventilating equipment, shall comply with Section 11B-308 except the low reach shall be measured...