In sleeping rooms with more than 25 beds, a minimum of 5 percent of the beds shall have clear floor space complying with Section 11B-806.2.3....
Search Results "Intensive Care Patient Room"
-
11B-224.8.1 More than 25-bed sleeping rooms
-
5.4.10 Transfer Support Fittings Recommendations for M301 and M302
The Committee recommends transfer supports not rotate when locked in place for patient transfer or use....
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground. Mirrors shall be full length with a reflective...
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground. Mirrors shall be full length with a reflective...
-
11B-809.10 Toilet and bathing rooms
[See subsections ...]
-
5.8 Wheelchair Spaces Recommendations for M303 Diagnostic Equipment Used by Patients Seated in a Wheelchair
5.8 Wheelchair Spaces Recommendations for M303 Diagnostic Equipment Used by Patients Seated in a Wheelchair...
-
M101.2 Application
Where diagnostic equipment is designed to support more than one patient position, the standards for each patient position supported shall be applied to the equipment....
-
806 Transient Lodging Guest Rooms
806 Transient Lodging Guest Rooms...
-
Needs Photos or Technical Info
Are these patient rooms designed only for those with cognitive impairments? I really want more information!...
-
Are accessible passenger loading zones required on sites where no passenger loading zone is intended?
Accessible passenger loading zones are required at these sites whether or not passenger loading zones are planned: parking facilities that provide valet parking, licensed medical care and...
-
Number of Accessible Guest Rooms
A hotel and motel trade group opposed any increase in the number of guest rooms required to be accessible and submitted a study it commissioned on the usage of such rooms....
-
M302.4.1 Clearance in Base
The base of the diagnostic equipment shall provide a clearance 39 inches (990 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep...
-
M302.4.1 Clearance in Base
The base of the equipment shall provide a clearance 44 inches (1120 mm) wide minimum, 6 inches (150 mm) high minimum measured from the floor, and 36 inches (915 mm) deep minimum...
-
11B-224.1.2 Guest room doors and doorways
[2010 ADA Standards] 224.1.2 Guest Room Doors and Doorways....
-
Sargent HP Bored Lock with Push/Pull Trim
The HP Series Bored Lock with ALP push/pull trim has ligature resistant features and provides an aesthetically-pleasing alternative to standard push/pull products. Ease of operation...
-
Architectural Builders Hardware Mfg., Inc. 6830 Series Time Out/Reverse Low Profile Hospital Latch
6830 Series Template - Low Profile, Reverse Latch, Cylindrical Push Pull Reverse Latch Cylindrical push/pull reverse latch 1-3/4" standard door thickness (specify if...
-
Architectural Builders Hardware Mfg., Inc. 6000 Series Wide Paddle Cylindrical Hospital Latch
LR6000 Hospital Latch Wide Paddle Cylindrical Hospital Latch 1-3/4" standard door thickness (specify if different) Meets ADA requirements
-
Architectural Builders Hardware Mfg., Inc. 6000 Series Push/Pull Hospital Latch
The 6000 Series Push/Pull Hospital Latch offers versatility and durability for commercial and institutional settings. These models are designed for commercial and institutional doors...
-
Rockwood Manufacturing Company 596S Hospital Push Pull Latch 2-3/4" Backset
Material: Stainless Steel FEATURES: • Easy to operate low-force paddle. • Non-handed (except for engraved models). • Includes Standard 161 and ASA strike. • 2-3/4", 5" or 7"...
-
Corbin Russwin Inc. HPSK Push Pull Paddle Trim
Corbin Russwin HPSK (mortise lock) push/pull paddle trim provides an aesthetically pleasing alternative to products with standard push/pull trim. Its heavy-duty design and ANSI/BHMA...
-
Rockwood Manufacturing Company 596 Hospital Push Pull Latch 5" Backset
Material: Stainless Steel FEATURES: • Easy to operate low-force paddle. • Non-handed (except for engraved models). • Includes Standard 161 and ASA strike. • 2-3/4", 5" or 7"...
-
Don-Jo Mfg., Inc. 2-3/4" Hospital Latch 4500
Product Specifications Number 4500 Back set 2-3/4" Material Brass Size 2-3/4" x 4-1/2" Shelf...
-
Don-Jo Mfg., Inc. 5" Hospital Latch 4550
Product Specifications Number 4550 Back set 5" Material Brass Size 2-3/4" x 4-1/2" Shelf...
-
Scoping [4.1.3(21), 4.1.6(3)(h)]
Scoping [4.1.3(21), 4.1.6(3)(h)] ADAAG requires access to 5% of each "type" of dressing room in each location....
