DEPARTMENT OF JUSTICE 28 CFR Parts 35 and 36 [CRT Docket No. 138] RIN 1190-AA61; RIN 1190-AA62; RIN 1190-AA64; RIN 1190-AA65 Nondiscrimination on the Basis of...
Search Results "Access Aisle Width"
-
28 CFR Parts 35 and 36 Nondiscrimination on the Basis of Disability; Notice of Withdrawal of Four Previously Announced Rulemaking Actions
- Equalizer 6000 Series Exercise Machine
- American Safety Tread Co., Inc. Type T-24H Contrasting Stripe
- Outdoor Extreme Mobility Beach Cruiser Powered Wheelchair
- BTX Intelligent Fashion Classic Drapery Systems
-
For People with Disabilities, Which Circulation Paths Are Usable, Available, and Closest?
Exits should be marked by tactile signs that are properly located so they can be readily found by a person who is blind or has low vision from any direction of approach to the exit access...
- EZ Dock Transition Plate
-
H.4.ii. - If an instructor uses slides from presentation software, such as Microsoft PowerPoint or Corel Presentations, which are projected to a live class, do the Access Board standards apply?
However, if the slides contain embedded multimedia elements, such as videos, then the Access Board standards apply to this live presentation....
-
Accessible Product Certification Process
Access Board, DOJ, and other relevant standards-writing and enforcement agencies....
-
1012.3 Opening limitations
At elevated walking surfaces for access to and use of electrical, mechanical or plumbing systems or equipment, guards shall have balusters or be of solid materials such that a sphere with...
- Trimco 1069 Series ADA Pocket Door Pull
- Hoyer Heavy-Duty Power Lift with Optional Scale
-
1015.3 Viewing Space
The viewing space shall be 32 inches (815 mm) maximum and 51 inches (1295 mm) minimum high above the ground and shall extend the full width of the clear ground space....
-
§ 36.304(d)(3)
Such measures include, for example, providing a ramp with a steeper slope or widening a doorway to a narrower width than that mandated by the alterations requirements....
-
Inclined Wheelchair Lifts
Codes generally prohibit inclined lifts from reducing the required width of egress routes. The ASME standard allows inclined lifts with enclosures and those without....
-
1015.3 Viewing Space
The viewing space shall be 32 inches (815 mm) maximum and 51 inches (1295 mm) minimum high above the ground and shall extend the full width of the clear ground space....
-
11B-404.2.4 Maneuvering clearances
Maneuvering clearances shall extend the full width of the doorway and the required latch side or hinge side clearance. Exception: Reserved....
-
11B-703.7.2.7 Pedestrian traffic-control buttons
Pole-supported pedestrian traffic control buttons shall be identified with color coding consisting of a textured horizontal yellow band 2 inches (51 mm) in width encircling the pole, and...
-
11B-404.2.4 Maneuvering clearances
Maneuvering clearances shall extend the full width of the doorway and the required latch side or hinge side clearance. Exception: Reserved....
-
11B-705.1.2.2.1 Perpendicular curb ramps
Detectable warnings shall extend the full width of the ramp run less 2 inches (51 mm) maximum on each side, excluding any flared sides....
-
406.8 Detectable Warnings
The detectable warning shall extend the full width of the curb ramp (exclusive of flared sides) and shall extend either the full depth of the curb ramp or 24 inches (610 mm) deep minimum...
-
§382.51 What requirements must carriers meet concerning the accessibility of airport facilities?
[Doc. No. DOT-OST-2004-19482, 73 FR 27665, May 13, 2008, as amended at 74 FR 11471, Mar. 18, 2009; 75 FR 44887, July 30, 2010]
-
Registered Accessibility Specialist (RAS) Bulletin RAS 2014-03 Equivalent Facilitation
RAS 2014-03 Equivalent Facilitation Effective Date: July 7, 2014 2012 TAS Reference: 103 In accordance with the 2012 TAS, Advisory 103, all determinations of...