2.0 Methodology
Search Results "Mobility Feature"
-
Section 2.0 Methodology
-
3.3.7 Toe Clearance Height, minimum
3.3.7 Toe Clearance Height, minimum There is relatively large disparity between the standards for toe clearance height, with the U.S. having the lowest (230 mm or 9 in.),...
-
2.3 Analysis
2.3 Analysis
-
Section 4.0 Implications for Standards and Design
Section 4.0 Implications for Standards and Design
-
3.3.9 Toe Clearance Depth, minimum
3.3.9 Toe Clearance Depth, minimum Toe clearance depths for the standards range from 150 mm (6 in.) in the U.S. to 230 mm (9 in.) in Canada (Figure 3‒9). None of the comparison...
-
4.3 Specific Recommendations
4.3 Specific Recommendations
-
Section 3.0 Study Findings
3.0 Study Findings
-
233.3.1.2 Facilities Containing Emergency Transportable Housing Units, F233.3.1.2 Facilities Containing Emergency Transportable Housing Units, F233.4.1.2 Facilities Containing Emergency Transportable Housing Units
F233.4.1.2 Facilities Containing Emergency Transportable Housing Units These sections contain the scoping requirements for emergency transportable housing units with communication features...
-
11B-701.1 Scope
The provisions of Division 7 shall apply where required by Division 2 or where referenced by a requirement in this chapter.
-
701.1 Scope
The provisions of Chapter 7 shall apply where required by Chapter 2 or where referenced by a requirement in this document.
-
4. Amend § 35.133 by adding paragraph (c) to read as follows:
4. Amend § 35.133 by adding paragraph (c) to read as follows:
-
§ 35.133(c)
(c) If the proposed standards reduce the number of required accessible elements below the number required by the 1991 Standards, the number of accessible elements in a facility...
-
MISCELLANEOUS PROVISIONS
Except as otherwise specified in this Agreement, at yearly anniversaries of the effective date of this Agreement until it expires, the City will submit written reports to the...
-
11B-701.1 Scope
11B-701.1 Scope. The provisions of Division 7 shall apply where required by Division 2 or where referenced by a requirement in this chapter.
-
11B-701.1 Scope
The provisions of Division 7 shall apply where required by Division 2 or where referenced by a requirement in this chapter.
-
701.1 Scope
The provisions of Chapter 7 shall apply where required by Chapter 2 or where referenced by a requirement in this document.
-
701.1 Scope
701.1 Scope. The provisions of Chapter 7 shall apply where required by Chapter 2 or where referenced by a requirement in this code.
-
Alterations. (Section-by-Section Analysis)
Alterations. Although the 2010 Standards contain specifications for alterations in existing detention and correctional facilities, section 232.2 defers to the Attorney General the...
-
Maintenance of Accessible Features
Maintenance of Accessible Features Accessible pool features must be maintained in operable, working condition so that persons with disabilities have access to the pool whenever the pool...
-
11B-809.10.5 Bathtubs
Bathtubs required by Section 11B-809.10 shall comply with this section.
-
11B-809.10.5 Bathtubs
Bathtubs required by Section 11B-809.10 shall comply with this section.
-
11B-809.9.5 Lower shelving
Lower shelving and/or drawer space shall be provided at a height of 48 inches (1219 mm) maximum above the finish floor.
-
11B-809.9.5 Lower shelving
Lower shelving and/or drawer space shall be provided at a height of 48 inches (1219 mm) maximum above the finish floor.
-
11B-233.3.4.3 Alterations to residential dwelling units with adaptable features
The building standards for residential dwelling units with adaptable features do not apply to the alteration, repair, rehabilitation or maintenance of residential dwelling units constructed...