Visual characters shall be 40 inches (1015 mm) minimum above the finish floor or ground. EXCEPTION: Visual characters indicating elevator car controls shall not be required to...
Search Results "RWD: Responsive Web Design"
Filters
Commonly Searched Documents
-
Height from Finish Floor or Ground: ADA Standard Section 703.5.6
-
Exit Doors: ADA Standard Section 216.4.1
Section 216.4.1 covers scoping requirements in the current ADA Standards for signs at exit doors.
-
Location: ADA Standard Section 703.4.2
Where a tactile sign is provided at a door, the sign shall be located alongside the door at the latch side. Where a tactile sign is provided at double doors with one active leaf, the...
-
11B-216.4.1 Exit doors
Signs required by Chapter 10, Section 1013.4 at doors to exit passageways, exit discharge, and exit stairways shall comply with Sections 11B-703.1, 11B-703.2, 11B-703.3, and...
-
11B-703.1 General
Signs shall comply with Section 11B-703. Where both visual and tactile characters are required, either one sign with both visual and tactile characters, or two separate signs, one...
-
11B-703.5.3 Style
Characters shall be conventional in form. Characters shall not be italic, oblique, script, highly decorative, or of other unusual forms.
-
Inclusion Solutions Functional Needs Support Services (FNSS) Shelter Tool Kit
Our Shelter Toolkit matches the ADAAG guidelines for shelters together with a proven solution, taking the hard work out of compliance. Modeled on the ADA Checklist for Emergency...
-
§ 37.21(a)
(a) This part applies to the following entities, whether or not they receive Federal financial assistance from the Department of Transportation:
-
407.2.2.1 Visible and Audible Signals
Visible and audible signals shall not be required at each destination-oriented elevator where a visible and audible signal complying with 407.2.2 is provided indicating the elevator car designation...
-
407.2.2.1 Visible and Audible Signals
Visible and audible signals shall not be required at each destination-oriented elevator where a visible and audible signal complying with 407.2.2 is provided indicating the elevator car designation...
-
407.2.2.1 Visible and Audible Signals
Visible and audible signals shall not be required at each destination-oriented elevator where a visible and audible signal complying with 407.2.2 is provided indicating the elevator car designation...
-
Mounting Height and Location
Response. The Board combined the height and location requirements for raised and braille characters into one section (703.4) for clarification and simplicity....
-
§100.205(a)
(a) Covered multifamily dwellings for first occupancy after March 13, 1991 shall be designed and constructed to have at least one building entrance on an accessible route unless it is impractical...
-
216 Signs
Scoping requirements for signs cover room designations (216.2) and directional and informational signs (216.3)....
-
Question 17
YES/NO 17. Are the signs for the accessible restrooms and fitting rooms still readable and mounted next to the latch side of the door, at 5 feet to...
-
M1
M1. If a sign is provided at the toilet room entrance (e.g. Men, Women, Boys, Girls, etc.), is a sign with raised characters and Braille mounted on the wall adjacent to the latch...
-
Transportation as an Employment Support
Transportation as an Employment Support ________________________________________________________________ 1983 Across the nation, disability advocates draw attention to the...
-
Takeform Fusion Signage Office/Suite/Room Identification Type I
All room ID's have an ADA component with raised upper case text and Braille. Type H and I include a printed insert. The insert lens is non-glare and inlaid for clean, flush...
-
Takeform Fusion Signage Interior Stairwell Type N
Fire and building code typically requires that stairwells in buildings of three floors or more identify the floor and exit point. Raised text and Braille are not required. Stairwell...
-
Takeform Fusion Signage Office/Suite/Room Identification Type F
All room ID's have an ADA component with raised upper case text and Braille. Type H and I include a printed insert. The insert lens is non-glare and inlaid for clean, flush...
-
Takeform Fusion Signage Office/Suite/Room Identification Type G
All room ID's have an ADA component with raised upper case text and Braille. Type H and I include a printed insert. The insert lens is non-glare and inlaid for clean, flush...
-
ADA Sign Depot Meeting Room Sign with Tactile Text and Grade 2 Braille - 8" x 4"
Meeting Room Sign - 8" x 4" - ADA Compliant Tactile Braille Sign ADA compliant non-glare matte finish ADA compliant font and tactile (1/32 inch raised)...
-
Takeform Fusion Signage Office/Suite/Room Identification Type H
All room ID's have an ADA component with raised upper case text and Braille. Type H and I include a printed insert. The insert lens is non-glare and inlaid for clean, flush...
-
Seton 12" x 6" Custom Edged ADA Signs
Attractive cut edges add style and beauty to your signs Signs are laser cut to your specifications as one piece so letters, Braille and numbers can not be pried off Durable...
