The Hand/Foot Push Plate Switch consist of 1-gang 30″-"60"L Push Plate and back plate with 2,3 switches as needed. Features All manufactured with rust resistant 1/4" inch...
Search Results "Automatic Door"
Commonly Searched Documents
- Deltrex Hand/Foot Push Plate Switches
-
11B-404 DOORS, DOORWAYS, AND GATES
[See subsections ...]
-
Common Questions (Entrances, Doors, and Gates)
Common Questions
-
11B-404 Doors, doorways, and gates
[See subsections ...]
-
11B-404 Doors, doorways, and gates
[See subsections ...]
-
11B-405.7.5 Doorways
Advisory 11B-405.7.5 Doors at ramp landings....
-
Door stop
[See subsections ...]
- Norton Surface Mounted 7100SZ Series SafeZone® Electromechanical Closer
-
Accessible entrances that have turnstiles must provide an accessible gate or door.
• Accessible entrances that have turnstiles must provide an accessible gate or door....
-
4.13.4 Double-Leaf Doorways
If doorways have two independently operated door leaves, then at least one leaf shall meet the specifications in 4.13.5 and 4.13.6. That leaf shall be an active leaf....
-
4.13.4 DOUBLE-LEAF DOORWAYS
If doorways have two independently operated door leaves, then at least one leaf shall meet the specifications in 4.13.5 and 4.13.6. That leaf shall be an active leaf....
-
Scoping [4.1.3(20)]
The requirements of this section also apply to automatic fare vending and payment systems in transit stations....
-
Can doors swing into turning space?
Yes, doors can swing into turning space....
-
1132A.10 Door signal devices
1132A.10 Door signal devices. Every primary entrance to a covered multifamily dwelling unit shall be provided with a door buzzer, bell, chime or equivalent....
-
3. Measuring Door Openings
Measuring Door Openings Special care is needed when measuring the clear opening of a doorway. To measure the clear opening of a standard hinged door, open the door to 90 degrees....
-
ATM Clear Floor or Ground Space
Sections 707.2 and 707.3 address clear floor or ground space requirements and operable parts, respectively. These provisions include exceptions for drive-up only ATMs. In the final...
-
4.1.3(20)
(20) Where automated teller machines (ATMs) are provided, each ATM shall comply with the requirements of 4.34 except where two or more are provided at a location, then only one must...
-
Automated Teller Machines [4.34]
[See subsections ...]
-
4.34 Automated Teller Machines
[See subsections ...]
-
III-7.5185 Automated teller machines
III−7.5185 Automated teller machines (ATM's) (ADAAG §4.1.3(20)). Where ATM's are provided, each must be accessible, except that only one need comply when two or more ATM's are at the...
-
11) Automated teller machines (ATM's)
11) Automated teller machines (ATM's) ADAAG: Where ATM's are provided, each must be accessible, except that only one need comply when two or more ATM's are at the same location....
-
4.13.5 Clear Width
Doorways shall have a minimum clear opening of 32 in (815 mm) with the door open 90 degrees, measured between the face of the door and the opposite stop (see Fig. 24(a), (b), (c), and (d...
- Norton 5600 Series Low Energy Operator
-
4.13.5 CLEAR WIDTH
Doorways shall have a minimum clear opening of 32 in (815 mm) with the door open 90 degrees, measured between the face of the door and the stop (see Fig. 24(a), (b), (c), and (d))....