• Accessible entrances that have turnstiles must provide an accessible gate or door....
Search Results "Automatic Door"
-
Accessible entrances that have turnstiles must provide an accessible gate or door.
-
4.13.4 Double-Leaf Doorways
If doorways have two independently operated door leaves, then at least one leaf shall meet the specifications in 4.13.5 and 4.13.6. That leaf shall be an active leaf....
-
4.13.4 DOUBLE-LEAF DOORWAYS
If doorways have two independently operated door leaves, then at least one leaf shall meet the specifications in 4.13.5 and 4.13.6. That leaf shall be an active leaf....
-
Norton Surface Mounted 7100SZ Series SafeZone® Electromechanical Closer
When the door is opened manually, SafeZone senses movement in the door opening and stops the door from closing....
-
Can doors swing into turning space?
Yes, doors can swing into turning space....
-
Scoping [4.1.3(20)]
The requirements of this section also apply to automatic fare vending and payment systems in transit stations....
-
1132A.10 Door signal devices
1132A.10 Door signal devices. Every primary entrance to a covered multifamily dwelling unit shall be provided with a door buzzer, bell, chime or equivalent....
-
3. Measuring Door Openings
Measuring Door Openings Special care is needed when measuring the clear opening of a doorway. To measure the clear opening of a standard hinged door, open the door to 90 degrees....
-
4.13.5 Clear Width
Doorways shall have a minimum clear opening of 32 in (815 mm) with the door open 90 degrees, measured between the face of the door and the opposite stop (see Fig. 24(a), (b), (c), and (d...
-
ATM Clear Floor or Ground Space
Sections 707.2 and 707.3 address clear floor or ground space requirements and operable parts, respectively. These provisions include exceptions for drive-up only ATMs. In the final...
-
4.1.3(20)
(20) Where automated teller machines (ATMs) are provided, each ATM shall comply with the requirements of 4.34 except where two or more are provided at a location, then only one must...
-
Automated Teller Machines [4.34]
[See subsections ...]
-
4.34 Automated Teller Machines
[See subsections ...]
-
III-7.5185 Automated teller machines
III−7.5185 Automated teller machines (ATM's) (ADAAG §4.1.3(20)). Where ATM's are provided, each must be accessible, except that only one need comply when two or more ATM's are at the...
-
11) Automated teller machines (ATM's)
11) Automated teller machines (ATM's) ADAAG: Where ATM's are provided, each must be accessible, except that only one need comply when two or more ATM's are at the same location....
-
4.13.5 CLEAR WIDTH
Doorways shall have a minimum clear opening of 32 in (815 mm) with the door open 90 degrees, measured between the face of the door and the stop (see Fig. 24(a), (b), (c), and (d))....
-
11B-803.3 Door swing
Doors shall not swing into the room unless a turning space complying with Section 11B-304.3 is provided beyond the arc of the door swing....
-
11B-803.3 Door swing
Doors shall not swing into the room unless a turning space complying with Section 11B-304.3 is provided beyond the arc of the door swing....
-
Norton 5600 Series Low Energy Operator
Ideal for retrofit applications, the 5600 Series converts interior, non-fire rated doors for ADA compliance easily and affordably and provides a simple way to achieve touchless environments...
-
Tormax Technologies iMotion® TN 110 In-Floor Swing Door Operator (High and Low Energy)
iMotion® TN 110 In-Floor Swing Door Operator (High and Low Energy) The iMotion® TN 110 In-Floor swing Door Operator (High and Low Energy) is the best choice for door automation in demanding...
-
11B-411.3.1 Type
Elevator door type shall comply with Section 11B-407.3.1....
-
11B-411.3.1 Type
Elevator door type shall comply with Section 11B-407.3.1....
-
404.2.10 Door and Gate Surfaces
Swinging door and gate surfaces within 10 inches (255 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
11B-408.3 Elevator doors
Elevator hoistway doors shall comply with Section 11B-408.3....
