Grab bars shall be installed in a horizontal position, 33 inches (838 mm) minimum and 36 inches (914 mm) maximum above the finish floor measured to the top of the gripping surface, except...
Search Results "Shall"
-
11B-609.4 Position of grab bars
-
11B-411.2.1.6 Identification of floors served
buildings with two or more elevator banks, each serving a different group of specific floors, hall call consoles located on floors with a building entry, including parking and transfer levels, shall...
-
11B-1008.2.4.2 Elevated
The clear width of accessible routes connecting elevated play components shall be 36 inches (914 mm) minimum....
-
11B-233.3.3 Additions
Where an addition to an existing public housing facility results in an increase in the number of residential dwelling units, the requirements of Section 11B-233.3.1 shall apply only to the...
-
11B-1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
11B-703.2.7 Character spacing
Character spacing shall be measured between the two closest points of adjacent raised characters within a message, excluding word spaces....
-
11B-233.3.1.1 Residential dwelling units with mobility features
In public housing facilities with residential dwelling units, at least 5 percent, but no fewer than one unit, of the total number of residential dwelling units shall provide mobility features...
-
F227.2 Check-Out Aisles
Where check-out aisles are provided, check-out aisles complying with 904.3 shall be provided in accordance with Table F227.2....
-
1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
227.2 Check-Out Aisles
Where check-out aisles are provided, check-out aisles complying with 904.3 shall be provided in accordance with Table 227.2....
-
227.2 Check-Out Aisles
Where check-out aisles are provided, check-out aisles complying with 904.3 shall be provided in accordance with Table 227.2....
-
1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the...
-
68.52. Inspections
TexReg 8807; amended effective February 1, 2005, 30 TexReg 382; amended effective March 1, 2007, 32 TexReg 884) (a) The owner of a building or facility subject to ยง469.101 of the Act shall...
-
Error/Omission: Toilet rooms with 6 or more toilet stalls lack a 36" wide "ambulatory" toilet stall.
If toilet stalls are provided, then at least one shall be a standard toilet stall complying with 4.17; where 6 or more stalls are provided, in addition to the stall complying with 4.17.3...
-
11B-228.2 Mail boxes
Where mail boxes are provided in an interior location, at least 5 percent, but no fewer than one, of each type shall comply with Section 11B-309....
-
11B-233.3.3 Additions
Where an addition to an existing public housing facility results in an increase in the number of residential dwelling units, the requirements of Section 11B-233.3.1 shall apply only to the...
-
11B-1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
1.1.8.1 Findings and filings
The city, county, or city and county shall make express findings for each amendment, addition or deletion based upon climatic, topographical or geological conditions....
-
11B-233.3.1.1 Residential dwelling units with mobility features
In public housing facilities with residential dwelling units, at least 5 percent, but no fewer than one unit, of the total number of residential dwelling units shall provide mobility features...
-
1.1.8.1 Findings and filings.
The city, county, or city and county shall make express findings for each amendment, addition or deletion based upon climatic, topographical or geological conditions....
-
1009.1 Accessible means of egress required
Accessible means of egress shall comply with this section. Accessible spaces shall be provided with not less than one accessible means of egress....
-
11B-1002.4.3 Gaps
Floors of amusement rides with wheelchair spaces and floors of load and unload areas shall be coordinated so that, when amusement rides are at rest in the load and unload position, the vertical...
-
11B-213.3.4 Lavatories
Where lavatories are provided, at least 10 percent but no fewer than one shall comply with Section 11B-606 and shall not be located in a toilet compartment....
-
11B-603.2.3 Door swing
Doors shall not swing into the clear floor space or clearance required for any fixture....