(5) (a) If parking spaces are provided for employees or visitors, or both, then accessible spaces, complying with 4.6, shall be provided in each such parking area in conformance with the...
Search Results "Shall"
-
4.1.1(5)
-
16(c)
shall review it for completeness....
-
I. COORDINATION AND OVERSIGHT OF IMPLEMENTATION OF ACCESS PLAN
The appointment of the Access Coordinator (or Coordinating Committee) shall be subject to the approval of Plaintiff’s Counsel, provided that such approval shall not be unreasonably withheld...
-
11B-408.4.1 Car dimensions and doors
Elevator cars shall provide a clear width 42 inches (1067 mm) minimum and a clear depth 54 inches (1372 mm) minimum....
-
M303.2.4.1.2 Height
Wheelchair spaces shall include toe clearance 9 inches (230 mm) high minimum above the floor measured to a depth of 6 inches (150 mm) maximum from the toe end of the wheelchair space....
-
404.2.7 Door and Gate Hardware
Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with 309.4....
-
404.2.7 Door and Gate Hardware
Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with 309.4....
-
11B-805 Medical care and long-term care facilities
work stations, equipment consoles, clean and soiled utility cabinets, and storage areas; and shall comply with Sections 11B-225 and 11B-902....
-
Technical Memorandum TM 2012-02 Emergency Response Buildings and Facilities
for 28 CFR Parts 35 and 36 Nondiscrimination on the Basis of Disability in State and Local Government Services; Final Rules; September 15, 2010; the following application of the 2012 TAS shall...
-
404.2.7 Door and Gate Hardware
Handles, pulls, latches, locks, and other operable parts on doors and gates shall comply with 309.4....
-
16(h)
(h) Upon completion of all of the items on its plan, each hotel owner shall be required to submit to the ADA Consultant documentary and photographic evidence that it has complied with the...
-
1136A.1 Receptacle heights
Electrical receptacle outlets on branch circuits of 30 amperes or less and communication system receptacles shall be located no more than 48 inches (1219 mm) measured from the top of the...
-
1009.5.1 Transfer Platform
A transfer platform shall be provided at the head of each transfer system....
-
11B-1009.5.6 Size
Each transfer step shall have a tread clear depth of 14 inches (356 mm) minimum and 17 inches (432 mm) maximum and shall have a tread clear width of 24 inches (610 mm) minimum....
-
11B-407.4.7.1.2 Location
Raised characters or symbols and Braille designations shall be placed immediately to the left of the control button to which the designations apply....
-
604.8.3 Coat Hooks and Shelves
Coat hooks shall be located within one of the reach ranges specified in 308....
-
1012.2 Recreational Vehicles
Parking spaces and pull-up spaces for recreational vehicles shall be 20 feet (6100 mm) wide minimum....
-
11B-804.3.2 Height
The kitchen work surface shall be 34 inches (864 mm) maximum above the finish floor or ground....
-
1013.3 Slope
The slope of the surface of tent pads, tent platforms, and clear ground spaces shall not be steeper than 1:48 in any direction....
-
11B-206.5.1 Entrances
Each entrance to a building or facility required to comply with Section 11B-206.4 shall comply with Section 11B-404. [2010 ADAS] 206.5.1 Entrances. ...
-
F248.1.2 Beach Nourishment
Beach access routes shall be provided in a number complying with F248.2 where the entity that administers or manages a beach undertakes a beach nourishment project....
-
F206.2.16.2 Soft Contained Play Structures
Where three or fewer entry points are provided for soft contained play structures, at least one entry point shall be on an accessible route....
-
406.2 Counter Slope
Counter slopes of adjoining gutters and road surfaces immediately adjacent to the curb ramp shall not be steeper than 1:20....
-
F241.1 General
Where provided, saunas and steam rooms shall comply with 612....