The slope of the surface of parking spaces and pull-up spaces shall not be steeper than 1:48 in any direction....
Search Results "Shall"
-
1012.5 Slope
-
11B-216.13.2 Removal of Cleaner Air Symbol
or facility identified by the Cleaner Air Symbol should temporarily or permanently cease to meet the minimum conditions of use identified in Section 11B-216.13.3, the Cleaner Air Symbol shall...
-
11B-203.13 Raised boxing or wrestling rings
Raised boxing or wrestling rings shall not be required to comply with these requirements or to be on an accessible route....
-
F244.2.3.1 Outdoor Constructed Features
Where provided, at least one of each type of outdoor constructed features shall comply with 1011....
-
1008.2.5.3.1 Handrail Gripping Surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
407.4.6 Elevator Car Controls
Where provided, elevator car controls shall comply with 407.4.6 and 309.4....
-
12204(a) Issuance of Guidelines
.-- Not later than 9 months after the date of enactment of this Act, the Architectural and Transportation Barriers Compliance Board shall issue minimum guidelines that shall supplement the...
-
11B-308.2.1 Unobstructed
Where a forward reach is unobstructed, the high forward reach shall be 48 inches (1219 mm) maximum and the low forward reach shall be 15 inches (381 mm) minimum above the finish floor or...
-
406.5 Location
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles....
-
F245.2.5.1 Outdoor Constructed Features
Where provided, at least one of each type of outdoor constructed feature shall comply with 1011....
-
F206.2.16.1 Ground Level and Elevated Play Components
At least one accessible route shall be provided within the play area....
-
§ 1194.22(k)
(k) A text-only page, with equivalent information or functionality, shall be provided to make a web site comply with the provisions of this part, when compliance cannot be accomplished in...
-
1008.2.5.3.1 Handrail Gripping Surfaces
Handrail gripping surfaces with a circular cross section shall have an outside diameter of 0.95 inch (24 mm) minimum and 1.55 inches (39 mm) maximum....
-
206.2.17.1 Ground Level and Elevated Play Components
At least one accessible route shall be provided within the play area....
-
1015.6 Slope
The slope of the surface of clear ground spaces and turning spaces shall not be steeper than 1:48 in any direction....
-
§ 1194.2(a)
(a) Products covered by this part shall comply with all applicable provisions of this part....
-
904.3.2 Counter
The counter surface height shall be 38 inches (965 mm) maximum above the finish floor or ground....
-
211.1 General
Where drinking fountains are provided on an exterior site, on a floor, or within a secured area they shall be provided in accordance with 211....
-
406.5 Location
Curb ramps and the flared sides of curb ramps shall be located so that they do not project into vehicular traffic lanes, parking spaces, or parking access aisles....
-
12143(d)(3) Modification of disapproved plan
(3) Modification of disapproved plan Not later than 90 days after the date of disapproval of a plan under this subsection, the public entity which submitted the plan shall modify the...
-
12206(c)(2)(C) Subchapter III
(C) Subchapter III The Attorney General, in coordination with the Secretary of Transportation and the Chair of the Architectural Transportation Barriers Compliance Board, shall implement...
-
403.5 Clearances
Walking surfaces shall provide clearances complying with 403.5....
-
12204(a) Issuance of guidelines
(a) Issuance of guidelines Not later than 9 months after July 26, 1990, the Architectural and Transportation Barriers Compliance Board shall issue minimum guidelines that shall supplement...
-
11B-1009.5.1 Transfer platform
A transfer platform shall be provided at the head of each transfer system....