This section also requires the surface of the clear ground space to be firm and stable and to allow the use of tent stakes or other tent securement devices....
Search Results "Door Surface"
Commonly Searched Documents
-
1013.2 Clear Ground Space
-
Selection of Participants
investigators at OSU were to pilot test the survey instruments with professional contacts in parks and recreation that manage pedestrian trails designed, developed, and maintained with the natural surface...
-
1016.4 Passing Spaces
inches (1525 mm), where the route is: • Heavily used or adjoins elements, space, or facilities that are heavily used; or • A boardwalk or otherwise not at the same level as the ground surface...
-
1134A.5, Item 1
The edge of the clear floor space shall be flush with the control wall surface....
-
11B-1009.4.5 Grab bars
The top of the gripping surface shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above transfer walls....
-
11B-1009.4.5 Grab bars
The top of the gripping surface shall be 4 inches (102 mm) minimum and 6 inches (152 mm) maximum above transfer walls....
- ADA and the FTA: Improving Transit Access for People with Disabilities
-
Features of the ETA Standard Barrier Survey/Barrier Management System [Title II]
First, they miss important barriers that may become risk-management headaches in the future (such as floor-surface barriers to people with mobility impairments and protruding objects that...
-
PART 3: ACCESSIBLE EXAMINATION ROOMS
The features that make this possible are: an accessible route to and through the room; an entry door with adequate clear width, maneuvering clearance, and accessible hardware;...
-
Ambulatory Accessible Toilet Compartments
Ambulatory accessible stalls feature parallel grab bars on both sides and a self-closing door and are designed to accommodate people who may have difficulty walking, sitting, or rising....
-
1125B.3
Where the distance from the wheelchair to the clothes rod or shelf exceeds 10 inches (254 mm), as in closets without accessible doors, the height and depth to the rod or shelf shall comply...
-
Maintaining Accessible Features for Customers
Hospitality is not provided when a guest cannot get to the front door, register at the front desk, eat in the restaurant, or maneuver around his room....
-
C. Communication Features
Yes __ No __ N/A __ Comments: ________________________________________ Visual notification device for door knocks and phone calls (Cannot be same strobe as the fire alarm strobe unit)...
-
Guidelines
Tactile objects are tied closely to the exhibit’s interpretive theme and defy the same standardized approach that can be applied to an exhibit’s mounting height, door size and location,...
- American Standard Commercial Toilet Seat for Baby Devoro Bowls
-
Clear Floor Space: ADA Standard Section 606.2
Section 606.2 covers the current ADA Standards for clear floor space at lavatories and sinks.
-
11B-604.8.1.4 Toe clearance
Partition components at toe clearances shall be smooth without sharp edges or abrasive surfaces....
- Rakks® Wall Mounted Standards with Rakks® Brackets
- American Specialties Recessed Paper Towel Dispenser and Removable Waste Receptacle 204623
-
1007.3.2 Golf Club Reach Range Area
This includes accessible routes provided adjacent to or, where provided, on the playing surface of the hole. Figure 1007.3.2 Golf Club Reach Range Area...
-
1009.4.5 Grab Bars
The top of the gripping surface shall be 4 inches (100 mm) minimum and 6 inches (150 mm) maximum above transfer walls....
-
1003.2.12.2 Opening limitations
From a height of 34 inches (864mm) to 42 inches (1067mm) above the adjacent walking surfaces, a sphere 8 inches (203mm) in diameter shall not pass....
-
308.3.1 Unobstructed
Operable parts of fuel dispensers shall be permitted to be 54 inches (1370 mm) maximum measured from the surface of the vehicular way where fuel dispensers are installed on existing curbs...
-
R310 Passenger Loading Zones (Section-by-Section Analysis)
The access aisle must be marked to discourage parking in the aisle and comply with the technical requirements for surfaces (see R302.7)....