(b) Passageways. A route at least 32 inches wide shall be provided from doors required to be accessible by paragraph (a)(1) of this section to seating locations complying with...
Search Results "High Speed Rail"
Filters
Commonly Searched Documents
-
§ 38.93(b) Passageways
-
§ 38.93(d)(2) Exception
(2) Exception. New vehicles operating in existing stations may have a floor height within plus or minus 11/2 inches of the platform height. At key stations, the horizontal gap...
-
§ 38.83(c)(5) Slope
(5) Slope. Ramps or bridge plates shall have the least slope practicable. If the height of the vehicle floor, under 50% passenger load, from which the ramp is deployed is 3 inches or...
-
§ 38.93(a)(2)
(2) If doorways connecting adjoining cars in a multi-car train are provided, and if such doorway is connected by an aisle with a minimum clear width of 30 inches to one or more...
-
§ 38.125(b)(3) Emergency operation
(3) Emergency operation. The lift shall incorporate an emergency method of deploying, lowering to ground or station platform level with a lift occupant, and raising and stowing the...
-
§ 38.125(b)(9) Platform deflection
(9) Platform deflection. The lift platform (not including the entrance ramp) shall not deflect more than 3 degrees (exclusive of car roll) in any direction between its unloaded...
-
§ 38.125(b)(1) Design load
(1) Design load. The design load of the lift shall be at least 600 pounds. Working parts, such as cables, pulleys, and shafts, which can be expected to wear, and upon which the lift...
-
§ 38.95(b)(7) Platform gaps
(7) Platform gaps. Any openings between the lift platform surface and the raised barriers shall not exceed 5/8 inch wide. When the lift is at car floor height with the inner barrier...
-
11B-705.1.2.1 Platform edges
Detectable warning surfaces at platform boarding edges shall be 24 inches (610 mm) wide and shall extend the full length of the public use areas of the platform.
-
11B-247.1.2.1 Platform edges
Platform boarding edges shall have detectable warnings complying with Sections 11B-705.1.1 and 11B-705.1.2.1.
-
11B-810.6.1 Entrances
Where signs identify a station or its entrance, at least one sign at each entrance shall comply with Section 11B-703.2 and shall be placed in uniform locations to the maximum extent...
-
§ 38.95(a)(2) Exception
portable or platform lifts, ramps or bridge plates meeting the applicable requirements of this section are provided on station platforms or other stops required to be accessible, or mini-high...
-
§ 38.83(b)(8) Platform entrance ramp
Thresholds between 1/4 inch and 1/2 inch high shall be beveled with a slope no greater than 1:2....
-
Norton Surface Mounted Heavy Duty 9500 Series Door Closer
Ideal for high use openings, the Norton 9500 Series Cast Iron door closer offers the durability, flexibility and strength required to meet the needs of your facility....
-
DORMA 8900 Series Door Closer
Heavy-Duty Surface Applied Door Closer The 8900 door closer series designed to provide a highly flexible door control system suitable for institutional or high-traffic commercial applications...
-
12162(a)(3)(A)(ii) a number of spaces
(ii) a number of spaces
-
Allegion LCN 6030 Series Overhead Concealed Door Control
and exterior doors to 3’6” Aluminum frame requires minimum 1 3/4” (44 mm) x 4” (102 mm) tube Closers to meet ADA requirements Adjustment of spring power and latch speed...
-
Sargent 351 Series Aluminum Door Closer
Meets ADA requirements in all applications except Push Side Track application High impact non-corrosive plastic covers standard, metal optional....
-
Sargent 421 Cam Action Door Closer
meet ADA requirements in push or pull track applications Standard pressure relief valves for both opening and closing cycles protect the door & frame from damage caused by abuse High...
-
§ 38.83(b)(13) Handrails
The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure....
-
Sargent 281 Series Cast Iron Door Closer
and all hardware from excessive force Heavy duty mounting bracket for easy installation of full size iron closer Retrofits existing Sargent 250 and 1250 Series Closer installations High...
-
T103 Definitions
These terms are: boarding platform, fixed route service (or fixed route), large transit entity, large non-rail vehicle, small non-rail vehicle, and non-rail vehicle....
-
Sargent 1431 Series Aluminum Door Closer
Meets ADA requirements in all applications, except Push Side Track application (except track) High impact non-corrosive plastic covers with two machine screws standard, metal covers and...
-
T201.1 General
Non-rail vehicles purchased, leased or remanufactured by entities covered by the Americans with Disabilities Act (ADA) shall comply with the requirements in the Non-Rail Vehicle Guidelines...
