(c) Car ramp or bridge plate—
Search Results "High Speed Rail"
Filters
Commonly Searched Documents
-
§ 38.95(c) Car ramp or bridge plate
-
§ 38.125(b)(2)(iii) Exception
(iii) Exception. The brake or propulsion system interlocks requirement does not apply to platform mounted or portable lifts provided that a mechanical, electrical or other system...
-
§ 38.125(b)(2)(ii) Exception
(ii) Exception. Where physical or safety constraints prevent the deployment at some stops of a lift having its long dimension perpendicular to the car axis, the transportation entity...
-
§ 38.55 Priority seating signs
[See subsections ...]
-
§ 38.113(d) Coordination with boarding platforms
(d) Coordination with boarding platforms—
-
§ 38.73(d) Coordination with boarding platform
(d) Coordination with boarding platform—
-
§ 38.121 Public information system
[See subsections ...]
-
§ 38.113(c) Signals
(c) Signals. If doors to the platform close automatically or from a remote location, auditory and visual warning signals shall be provided to alert passengers of closing doors
-
§ 38.95(b)(12) Use by standees
(12) Use by standees. Lifts shall accommodate persons using walkers, crutches, canes or braces or who otherwise have difficulty using steps. The lift may be marked to indicate a...
-
§ 38.95(c)(1) Design load
(1) Design load. Ramps or bridge plates 30 inches or longer shall support a load of 600 pounds, placed at the centroid of the ramp or bridge plate distributed over an area of 26...
-
§ 38.125(d) Seating
(d) Seating—
-
§ 38.95(b)(3) Emergency operation
(3) Emergency operation. The lift shall incorporate an emergency method of deploying, lowering to ground or platform level with a lift occupant, and raising and stowing the empty...
-
§ 38.123(a)(2)
(2) The height of the water closet shall be 17 inches to 19 inches measured to the top of the toilet seat. Seats shall not be sprung to return to a lifted position.
-
§ 38.95(c)(7) Stowage
(7) Stowage. A compartment, securement system, or other appropriate method shall be provided to ensure that stowed ramps or bridge plates, including portable ramps or bridge plates...
-
§ 38.95(b)(1) Design load
(1) Design load. The design load of the lift shall be at least 600 pounds. Working parts, such as cables, pulleys, and shafts, which can be expected to wear, and upon which the lift...
-
§ 38.95(b)(2) Controls
(2) Controls—
-
§ 38.99 Floors, steps and thresholds
[See subsections ...]
-
§ 38.99(a)
(a) Floor surfaces on aisles, step treads, places for standees, and areas where wheelchair and mobility aid users are to be accommodated shall be slip-resistant
-
§ 38.113(a) Clear width
(a) Clear width.
-
§ 38.113(b) Passageway
(b) Passageway. Doorways required to be accessible by paragraph (a) of this section shall permit access by persons using mobility aids and shall have an unobstructed passageway at...
-
§ 38.75(b)
(b) Where designated wheelchair or mobility aid seating locations are provided, signs shall indicate the location and advise other passengers of the need to permit wheelchair and...
-
§ 38.75 Priority seating signs
[See subsections ...]
-
§ 38.95(b)(11) Boarding direction
(11) Boarding direction. The lift shall permit both inboard and outboard facing of wheelchairs and mobility aids.
-
§ 37.103 Purchase or lease of new non-rail vehicles by private entities primarily engaged in the business of transporting people
[56 FR 45621, Sept. 6, 1991, as amended at 76 FR 57936, Sept. 19, 2011]