Doors, doorways, and gates that are part of an accessible route shall comply with Section 11B-404. Exceptions: Doors, doorways, and gates designed to be operated only by...
Search Results "High Speed Rail"
Filters
Commonly Searched Documents
-
11B-404.1 General
-
§ 38.95(b)(8) Platform entrance ramp
Thresholds between 1/4 inch and 1/2 inch high shall be beveled with a slope no greater than 1:2....
-
Route and Destination Signs
Comments pointed out that this exception should allow characters to be less than 3 inches high for consistency with the character heights specified for signs generally in section 703....
-
§ 38.95(b)(13) Handrails
The handrails shall be capable of withstanding a force of 100 pounds concentrated at any point on the handrail without permanent deformation of the rail or its supporting structure....
-
§ 38.83(b)(6) Platform surface
The lift platform surface shall be free of any protrusions over 1/4 inch high and shall be slip resistant....
-
SafeZone: Norton 5600 Operator Installation Video
Norton 5600 Operator Installation Video
-
Norton 5600 Executive Kit_Private Meeting Video
A quick demo of how the Norton's 5600 Executive Kit (5600EX) works.
-
Speed
The AASHTO Guide for the Development of Bicycle Facilities (p. 36) recommends a minimum design speed of 30 km/h (20 mi/h) for shared use paths.(2) Table 12 shows that the mean speed for...
-
T604 Stowage
[See subsections ...]
-
T704.3 Automated Announcement Systems
Automated systems for stop announcements and route identification announcements shall comply with T704.3.
-
T211 Wheelchair Securement Systems
[See subsections ...]
-
T211 Wheelchair Securement Systems
Wheelchair securement systems complying with the technical requirements in T603 must be provided at each wheelchair space. The Access Board received several comments on the proposed...
-
§ 38.97(a)
(a) Where provided, handrails or stanchions within the passenger compartment shall be placed to permit sufficient turning and maneuvering space for wheelchairs and other mobility...
-
§ 38.113(d)(3) Exception
(3) Exception. Where platform set-backs do not allow the horizontal gap or vertical alignment specified in paragraph (d) (1) or (2), platform or portable lifts complying with...
-
§ 38.111(a)(2)
(2) Single-level dining and lounge cars shall have at least one connecting doorway complying with §38.113(a)(2) of this part connected to a car accessible to persons using...
-
§ 38.83(c)(3) Ramp threshold
(3) Ramp threshold. The transition from roadway or station platform and the transition from vehicle floor to the ramp or bridge plate may be vertical without edge treatment up to 1/4...
-
§ 38.125(c)(6)(ii) Exception
(ii) Exception. Ramps or bridge plates which are attached to, and deployed from, station platforms are permitted in lieu of car devices provided they meet the displacement...
-
§ 38.111(a)(3)
(3) Bi-level dining cars shall comply with §§38.113(a)(2), 38.115(b), 38.117(a), and 38.121 of this part.
-
§ 38.93(e) Signage
(e) Signage. The International Symbol of Accessibility shall be displaced on the exterior of all doors complying with this section unless all cars are accessible and are not marked...
-
§ 38.125(b)(7) Platform gaps
(7) Platform gaps. Any openings between the lift platform surface and the raised barriers shall not exceed 5/8 inch wide. When the lift is at car floor height with the inner barrier...
-
§ 37.51 Key stations in commuter rail systems
[56 FR 45621, Sept. 6, 1991, as amended at 58 FR 63102, Nov. 30, 1993; 79 FR 21405, Apr. 16, 2014]
-
Routes and Destinations: ADA Standard Section 810.6.2
Lists of stations, routes and destinations served by the station which are located on boarding areas, platforms, or mezzanines shall comply with 703.5. At least one tactile sign...
-
11B-810.6.2 Routes and destinations
Lists of stations, routes and destinations served by the station which are located on boarding areas, platforms, or mezzanines shall comply with Section 11B-703.5. At least one...
-
Allegion LCN 2210 Series Overhead Concealed Door Control
LCN 2210 Series The concealed 2210 Series, heavy duty, high security track closer features complete concealment with special components to minimize tampering and vandalism....
