For example, in kitchens, 804.3.1 requires at least one work surface with clear floor space complying with 306 to be centered beneath....
Search Results "Ground Floor Exit"
-
11B-809.2.2 Turning space
-
1118B.6
If the clear floor space allows parallel approach by a person in a wheelchair, the maximum high side reach allowed shall be 54 inches (1372 mm) and the low side reach shall be no less than...
-
E) Alternate Services
If a town meeting is scheduled to be held on the second floor of a building without an elevator and a person using a wheelchair wishes to attend the meeting, the meeting should be relocated...
-
G. Sleeping Areas
Accessible cots have a sleeping surface at approximately the same height above the floor as the seat of a wheelchair (17 to 19 inches above the floor)....
-
4.34.3(2)(b) Reach Depth More Than 10 in
Where the reach depth to the operable parts of any control as measured from the vertical plane perpendicular to the edge of the unobstructed clear floor space at the farthest protrusion...
-
Suggestion by Eldon Tipping
Suggestion by Eldon Tipping As published in Concrete Construction magazine, September 1998, Eldon Tipping made suggestions for a specification for sloped random - traffic floors such as...
-
Destination-Oriented Elevators
With destination-oriented elevators, passengers indicate the floor destination when calling an elevator, usually through a keypad....
-
11B-809.2.2 Turning space
For example, in kitchens, 804.3.1 requires at least one work surface with clear floor space complying with 306 to be centered beneath....
-
1015.2 Where required
along open-sided walking surfaces, including mezzanines, equipment platforms, aisles, stairs, ramps and landings that are located more than 30 inches (762 mm) measured vertically to the floor...
-
11B-809.2.2 Turning space
For example, in kitchens, Section 11B-804.3.1 requires at least one work surface with clear floor space complying with Section 11B-306 to be centered beneath....
-
Highest and Lowest Heights Obtained
The 50th percentile participants were able to transfer to a simple platform (no grab bars or a backrest present) that was 28 inches high with respect to the floor and 14 inches low relative...
-
Requirement 6. Reinforced walls for grab bars.
Where the toilet is not placed adjacent to a side wall, the bathroom would comply if provision was made for installation of floor mounted, foldaway or similar alternative grab bars....
-
11B-411.2.1.7.2 Assignment by touch screen hall call console
The audio output shall provide verbal instruction for the user to press the accessibility function button as a response to verbal direction in order to select the destination floor....
-
11B-411.2.1.7.2 Assignment by touch screen hall call console
The audio output shall provide verbal instruction for the user to press the accessibility function button as a response to verbal direction in order to select the destination floor....
-
II-5.5000 Historic preservation programs
ILLUSTRATION: Installing an elevator in an historic house museum to provide access to the second floor bedrooms would destroy architectural features of historic significance on the first...
-
11B-411.2.1.7.2 Assignment by touch screen hall call console
The audio output shall provide verbal instruction for the user to press the accessibility function button as a response to verbal direction in order to select the destination floor....
-
Mansfield Toilet ADA Commercial Package CP-1313
Bowl Specifically designed for commercial and industrial applications Elongated SmartHeight (16-1/2" high bowl), floor mount, rear outlet ADA Compliant High performance, high...
-
Cybex Total Access Treadmill
This allows fitness enthusiasts who have physical or sensory limitations to take advantage of fitness training on the same gym floor and using the same equipment as those who do not....
-
Thresholds at Exterior Doors/Thresholds to Balconies or Decks
This was a particular concern among commenters from the South Florida building industry, who stated that the 3/4" height is ineffective for upper floors of high rise buildings in a coastal...
-
Standard Stall
Recommendation: Ceiling-mounted partitions are a good idea because toe clearance is not interrupted by vertical supports [sic] Because floor-mounted toilets commonly project further...
-
AJW Architectural Products U704 Series 16"W x 30"H Fixed Tilt Angle Frame Mirror - Plate Glass Surface
Stainless steel frame is fabricated with welded mitered corners that are ground and polished smooth. Mirror extends out 4" at top and tapers to 1" at bottom....
-
GameTime GT Jam Box for PrimeTime Playground Equipment
Durable plastic housing is available in any of our vibrant plastic colors Includes mounting hardware for PowerScape or PrimeTime play systems Available for elevated or ground-level...
-
Bradley Grab Bars 1 1/2" with Concealed Mounting 812
All exposed welds ground and polished to blend. Mandrel bending process maintains uniform bar diameter. Return provides 1½" standard safety clearance between wall and bar....
-
AJW Architectural Products U703 Series 16"W x 24"H Adjustable Tilt Channel Frame Mirror - Plate Glass Surface
Product Features Fabricated of #18 gauge stainless steel with #4 satin finish Frame miters are not ground smooth and polished Multiple reflective surfaces available Mirror comes...
