If used, the buzzer or call bell must be located on an accessible route and mounted at an accessible height (generally not more than 48 inches above ground)....
Search Results "Ground Floor Exit"
Filters
Commonly Searched Documents
-
Accessible Entrance
-
Access-Able Designs Adult Dressing Bench D-101-42
Stainless steel frame holds up to 900 lbs. with proper mounting and sufficient flooring (ADA 4.26.3 is only 250 lbs.)...
-
Minimum Rear Wall Required.
Using the 2010 ADA Standards for Accessible Design, the minimum bench length would be 42" and the width of the clear floor space adjacent to the end of the bench would be 30"....
-
Existing elevator cab size
Requires the Accessibility Specialist plan or above. (Login or upgrade your account!)
-
203.9 Employee Work Areas
for employee work areas in 203.9 require that accessible routes and accessible means of egress connect with employee work areas so that persons with disabilities can approach, enter, and exit...
-
Wooster Products NITEGLOW® Anti-Slip Glow-In-The-Dark Safety Products
These nosings are used for exit path markings, steps and leading edge of landings when finding pathways in the dark is a necessity....
-
Accessible Route to Miniature Golf Course Holes
1007.2 of the 2010 Standards require an accessible route to connect accessible miniature golf course holes and the last accessible hole on the course directly to the course entrance or exit...
-
Station 3-Turning Radii
The composite video was subsequently viewed to determine the times that participants entered and exited each radius....
-
1015.3 Height
In Group F occupancies where exit access stairways serve fewer than three stories and such stairways are not open to the public, and where the top of the guard also serves as a handrail,...
-
11B-242.2 Swimming pools
Different locations will provide increased options for entry and exit, especially in larger pools. ◼ Exceptions: 1....
-
Comparison of Single-User Toilet Room Layouts: 2A, 2B, and 2C
The in-swinging door increases overall room size because it cannot swing over the required clear floor space at any accessible fixture, (see section 4.22.2 of the 1991 Standards)....
-
Components (M303.4)
M303.4.1 would require the height of the breast platform to be 30 inches (760 mm) high minimum and 42 inches (1065 mm) high maximum above the floor when mammography equipment is used by...
-
Weight Scales
Unit costs are presented for wheelchair scales with raised platforms and with flush platforms in the floor....
-
Elkay Cane Apron LKAPR1 for use with SwirlFlo® Bi-level Drinking Fountains
This apron provides the mandatory 27" (686mm) floor to underside requirement, when properly installed....
-
Access-Able Designs Shower Transfer Bench SH-420-2SDL
Stainless steel frame holds over 900 lbs. with proper mounting and sufficient flooring (ADA 4.26.3 is only 250 lbs.)...
-
Kohler San Tropez® Vertical Spray Bidet with 4 Faucet Holes
Installation Above- or below-floor rough-in...
-
M301.4.1 Clearance in Base (Section-by-Section Analysis)
The MDE NPRM proposed a clearance in the base of 44 inches wide minimum, 6 inches high minimum measured from the floor, and 36 inches deep minimum measured from the edge of the examination...
-
308.2.2 Obstructed High Reach
Where a high forward reach is over an obstruction, the clear floor space shall extend beneath the element for a distance not less than the required reach depth over the obstruction....
-
610.2 Bathtub Seats
The top of bathtub seats shall be 17 inches (430 mm) minimum and 19 inches (485 mm) maximum above the bathroom finish floor....
-
Openings, Width and Length of Wheelchair Space
Wheelchair spaces must have a clear width of 30 inches minimum and a clear length of 48 inches minimum, measured to at least 9 inches above the floor surface....
-
D. Signage
will be relocated to between 48 inches measured to the baseline of the lowest tactile character and 60 inches measured to the baseline of the highest tactile character above the finish floor...
-
Adaptability
Rooms need to be designed to provide required clear floor space at fixtures, turning space, and door clearance....
-
Outdoor Conditions [4.8.8]
Wetness reduces slip-resistance, which is fully characterized not only by the ramp or floor surface but by the material making contact with it....
