Detectable warning surfaces shall consist of truncated domes aligned in a square or radial grid pattern and shall comply with R305....
Search Results "End Transfer Surface"
-
R305.1 General
-
4.9.4(5)
(5) Top of handrail gripping surface shall be mounted between 34 in and 38 in (865 mm and 965 mm) above stair nosings....
-
4.15.2* Spout Height
Spouts shall be no higher than 36 in (915 mm), measured from the floor or ground surfaces to the spout outlet (see Fig. 27(a))....
-
4.19.6* MIRRORS
Mirrors shall be mounted with the bottom edge of the reflecting surface no higher than 40 in (1015 mm) from the floor (see Fig. 31)....
-
1005.3.1 Curb or Barrier
Curbs or barriers shall extend 2 inches (51 mm) minimum above the surface of the fishing pier or platform....
-
11B-1007.2 Accessible routes
Accessible routes located on playing surfaces of miniature golf holes shall be permitted to use the exceptions in Section 11B-1007.2....
-
1007.2 Accessible Routes
Accessible routes located on playing surfaces of miniature golf holes shall be permitted to use the exceptions in 1007.2. EXCEPTIONS: 1....
-
Q3: Roadway Resurfacing Alteration Project and Curb Ramp Improvements
If the resurfacing affects the crosswalk, even if it is not the full roadway width, then curb ramps must be provided at both ends of the crosswalk. See 28 CFR 35.151(i). ...
-
1115B.4.5, Item 2
An in-tub seat or a seat at the head end of the tub shall be provided as shown in Figures 11B-8 and 11B-9....
-
How to use this Manual
Also, the following appendices appear at the end of the manual: Appendix I: “Tips for Air Travelers with Disabilities” as they relate to the most commonly-used accommodations, facilities...
-
Election Day Record-Keeping
The clerk shall submit this Edge machine record to the Supervisor as soon as practicable after voting ends....
-
11B-408.4.1 Car dimensions and doors
Car doors shall be positioned at the narrow ends of cars and shall provide 32 inches (813 mm) minimum clear width. Exceptions: 1....
-
11B-408.4.1 Car dimensions and doors
Car doors shall be positioned at the narrow ends of cars and shall provide 32 inches (813 mm) minimum clear width....
-
R402 Protruding Objects (Section-by-Section Analysis)
R402 Protruding Objects (Section-by-Section Analysis) Objects with leading edges between 685 millimeters (2.25 feet) and 2 meters (6.7 feet) above the finish surface must not protrude...
-
1016.4 Passing Spaces
the route is heavily used or adjoins elements, spaces, or facilities that are heavily used; or where the route is a boardwalk or otherwise not at the same level as the adjoining ground surface...
-
608 Shower Compartments
Section 608 addresses transfer showers and roll-in showers and provides specifications for size and clearances, grab bars, seats, operable parts, shower spray units, thresholds, and enclosures...
-
Coverage and Definition of “Flight”
NPRM proposed to cover the activities of foreign carriers with respect to a “flight,” defined as a continuous journey, in the same aircraft or using the same flight number that begins or ends...
-
M303.2.3 Depth (Section-by-Section Analysis)
requirements based on how the wheelchair space is entered, made an editorial change to clarify that front or rear entry is where the wheelchair space entry and exit is provided at only one end...
-
Atlantis Community Inc. - Denver, CO
To that end, Independent Living is dedicated to providing individuals with disabilities the skills and support to achieve what others take for granted....
-
III. ACTIONS TO REMEDY NONCOMPLIANCE WITH ACCESSIBILITY REQUIREMENTS AT QUIKTRIP STORES
Effective Date of this Consent Decree will achieve certification of compliance with the ADA Standards and the elements of Paragraph 13 of this Consent Decree by the ILA by no later than the end...
-
BOAT LAUNCH RAMP
[DSA-AC] A sloped surface designed for launching and retrieving trailered boats and other water craft to and from a body of water....
-
H28
Is the surface of the toilet seat in this 36-inch-wide stall 17 to 19 inches above the floor? [ADA Standards §§ 4.16.3; 4.22.4] Yes No...
-
4.19.6* Mirrors
Mirrors shall be mounted with the bottom edge of the reflecting surface no higher than 40 in (1015 mm) above the finish floor (see Fig. 31)....
