education under section 612 of the Education of the Handicapped Act; and (3) With respect to postsecondary and vocational education services, a handicapped person who meets the academic and technical...
Search Results "Feasibility (Technical, Infeasible, Structural, Maximum Extent)"
-
§104.3(l) Qualified handicapped person
-
(3) Usable bathrooms
The details about, and the reasons for these modifications, and additional minor technical modifications made to certain design specifications of the Option One guidelines, are discussed...
-
C102.4 Advanced Television Systems Committee (ATSC)
ATSC also publishes a companion technical assistance guide to the use of its television standard....
-
E102.4 Advanced Television Systems Committee (ATSC)
ATSC also publishes a companion technical assistance guide to the use of its television standard....
-
Visual Alarms [4.28.3]
The technical requirements apply to single-station and building-wide alarm systems and are based in part on research sponsored by the Access Board as well as Underwriters Laboratories (UL...
-
2.1.2 Standards
Standards developed at the National Technical Institute for the Deaf (Johnstone l997) are part of the NTS Uniform Fire Prevention and Building Code, Chapter 23 of the Laws of l989 (Title...
-
VII. New Construction and Alterations
Public entities may choose between two technical standards for accessible design: The Uniform Federal Accessibility Standard (UFAS), established under the Architectural Barriers Act, or...
-
FAQ: Why should I enter keywords in my Voices post?
Corada’s existing database of other accessibility-related material, so your question, comment, Opinion or Interpretation will be in context with applicable federal standards, regulations, technical...
-
ADA Checklist for Existing Facilities: Identify barriers and develop a plan
This document provides background information and several checklists that address different priorities, possible barriers, technical specifications, and possible solutions....
-
Mirror Height
The ANSI A117.1‒2003 standard contains a new requirement that specifies a height of 35 inches maximum for accessible mirrors not located above a lavatory or counter top....
-
Main Lobby
The 40 1/2" height of the main ticket counter exceeds the maximum allowable height of 36" above the finished floor. See Standards § 7.2(1). j....
-
11B-503.3.3 Marking
The area within the borderlines shall be marked with hatched lines a maximum of 36 inches (914 mm) on center in a color contrasting with that of the aisle surface....
-
11B-504.2 Treads and risers
Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum. Treads shall be 11 inches (279 mm) deep minimum....
-
11B-605.4 Flush controls
Hand operated flush controls shall comply with Section 11B-309 except that the flush control shall be mounted at a maximum height of 44 inches (1118 mm) above the finish floor....
-
7.4.5 Passing Spaces
Trails with a clear tread width less than 60 inches (1525 mm) shall provide passing spaces complying with 7.4.5 at intervals of 1000 feet (300 m) maximum. ...
-
Clear Floor Space [4.34.2] and Reach Ranges [4.34.3]
Maximum reach heights to controls are based on the approach provided. The reach height applies to all controls and elements available for customer activation....
-
Sales Counters [7.2(1)]
(ADAAG does not specify maximum travel distances)....
-
Vertical Wheelchair Lifts
The ASME code specifies a maximum travel distance of 12 feet and prohibits penetration of floors....
-
4.34.6.6* RANGES AND COOKTOPS
The clear floor space may overlap the knee space, if provided, by 19 in (485 mm) maximum. The location of controls for ranges and cook-tops shall not require reaching across burners....
-
1.1.4
1.1.4 A maximum overall design running slope for exterior accessible ramps of 7.5% (1:13.3 or 1:13) is recommended....
-
11B-504.2 Treads and risers
Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum. Treads shall be 11 inches (279 mm) deep minimum. ...
-
11B-604.9.5 Flush controls
Hand operated flush controls shall comply with Sections 11B-309.2 and 11B-309.4 and shall be installed 36 inches (914 mm) maximum above the finish floor....
-
11B-504.2 Treads and risers
Risers shall be 4 inches (102 mm) high minimum and 7 inches (178 mm) high maximum. Treads shall be 11 inches (279 mm) deep minimum. ...
-
11B-703.2.5 Character height
Character height measured vertically from the baseline of the character shall be 5/8 inch (15.9 mm) minimum and 2 inches (51 mm) maximum based on the height of the uppercase letter “I”....