Dots shall be raised a minimum of 1/40 inch (0.635 mm) above the background. Braille dots shall be domed or rounded....
Search Results "Minimum Dimension"
Filters
Commonly Searched Documents
-
1117B.5.6
-
1133B.2.4.2
Minimum maneuvering clearances at doors shall be as shown in Figures11B-26A,11B-26B and11B-26C.The floor or ground area within the required clearances shall be level and clear....
-
404.2.7 Door and Gate Hardware
Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
404.2.7 Door and Gate Hardware
Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
Viewing Scopes [1011.2, 1011.3, and 1011.8]
At viewing scopes used from a seated position, a minimum of 36 by 48 inches of clear ground space positioned for a forward approach to the viewing scope must be provided....
-
5.3.3.1 Transfer Sides Recommendation for Exam Chairs with Fixed Footrests
The Committee recommends exam chairs with a fixed footrest have a transfer surface minimum of a 17 inch depth and a 21 inch width located on both sides of the chair to allow for a left or...
-
Expert opinion on the current literature
Two reviewers held at minimum a bachelor’s degree, seven reviewers master’s degree, one was a physician and three held PhD degrees. ...
-
201.1 Scope
Design; a building or facility that is being converted from residential to nonresidential or mixed use as defined by the Florida Building Code where such building or facility must, at a minimum...
-
404.2.7 Door and Gate Hardware
Operable parts of such hardware shall be 34 inches (865 mm) minimum and 48 inches (1220 mm) maximum above the finish floor or ground....
-
New Construction
The 2010 Standards set out the minimum accessibility requirements for newly constructed facilities. 2010 ADA Standards Basics Chapter 1: Application and Administration...
-
11B-217.2 Wheelchair accessible telephones
TABLE 11B-217.2 WHEELCHAIR ACCESSIBLE TELEPHONES NUMBER OF TELEPHONES PROVIDED ON A FLOOR, LEVEL, OR EXTERIOR SITE MINIMUM NUMBER OF REQUIRED WHEELCHAIR...
-
B. 2004 ADA and ABA Accessibility Guidelines
On July 23, 2004, the Access Board published updated minimum accessibility guidelines for both the ADA and the ABA known as the Americans with Disabilities Act and Architectural Barriers...
-
Comparison: 2010 and 1991 ADA Standards for Accessible Design - Scoping Requirements
., Door opening shall provide clear width of 32 inches minimum, Thresholds shall be ½ inch high maximum....
-
203 General Exceptions
1991 Standards for Accessible Design 2010 Standards for Accessible Design What’s New/Different 4.1 Minimum Requirements 203 General Exceptions...
-
16(h)
The ADA Consultant shall, with a minimum of two (2) weeks’ notice to the hotel owner, annually perform independent on-site inspections of ten (10) percent of the hotels that have reported...
-
11B-217.2 Wheelchair accessible telephones
TABLE 11B-217.2 WHEELCHAIR ACCESSIBLE TELEPHONES Number Of Telephones Provided On A Floor, Level, Or Exterior Site Minimum Number Of Required Wheelchair Accessible Telephones...
-
1136A.1 Receptacle heights
Baseboard electrical outlets used in relocatable partitions, window walls or other electrical convenience floor outlets are not subject to the minimum height requirements....
-
1007.3 Stairways
In order to be considered part of an accessible means of egress, a stairway between stories shall have a clear width of 48 inches (1219 mm) minimum between handrails and shall either incorporate...
-
Panda S.65 All Aluminum with Aluminum/Wood Clad Multi-Slide Door System
Configurations Available: Systems can pocket to left or right, and can stack to left and/or right. 45 and 90 degree configurations are available, as well as panoramic with a radius of minimum...
-
8.4 Improving Data Sources and Research
Section 3, to inform their deliberations, MDE Advisory Committee members sought as much information as possible, including anthropometric data, information about wheelchair and scooter dimensions...
-
Categorization of wheelchair versus other power-driven mobility devices. (Section-by-Section Analysis)
The Department will not foreclose any future technological developments by identifying or banning specific devices or setting restrictions on size, weight, or dimensions....
-
Pilot Rock PQT3-4 Square Pedestal Table Using Aluminum
Table offers 32" table height, 20" seat height (nominal dimensions). FRAME: Supported by one central, massive 5-3/8" sq. steel post. ...
-
Door King Inc. 9100 Slide Gate Operator Residential & Commercial
Dimensions: 12"W x 24"H x 11.5"D Options: Nickel plated chain. Stainless steel chain. Plug-in loop detectors. Heater kit for cold environments....
-
AJW Architectural Products UG30-A Series UG30-A12 12" Concealed Set Screw Flange, 1.5" Diameter Grab Bar - Configuration A
Secure mounting plate to wall surface at specified location with proper anchors (snugly) until proper centerline dimension is achieved....
