includes - (1) Qualified interpreters, notetakers, computer-aided transcription services, written materials, exchange of written notes, telephone handset amplifiers, assistive listening devices...
Search Results "Medical Device Manufacturer"
-
§ 35.104 Auxiliary aids and services
-
Section 2. Definitions
New terms defined in the final Guidelines include: "adaptable," "assistive device," "ground floor," "loft," "multistory dwelling unit," "single-story dwelling unit," and "story"....
-
C. Accessibility Within Toilet Rooms
Is there an area within the toilet room where a person who uses a wheelchair or mobility device can turn around - either a minimum 60-inch diameter circle or a “T”-shaped turn area?...
-
NPRM
determined that the transit authority could exclude from its vehicles a wheelchair that did not meet the common wheelchair criteria, even if the vehicle could physically accommodate the device...
-
NPRM
prohibitions on wheelchair users being able to use certain bus stops, use of lifts by standees, and carriage of three-wheeled scooters that are not easily secured by existing bus securement devices...
-
Stopping Sight Distance
function of the user's perception and brake reaction time, initial speed, the coefficient of friction between the user's wheels and the pavement, and the braking ability of the user's device...
-
Off-Road Racing Wheelchairs
These devices are used infrequently on public roads and shared use paths, and were therefore beyond the scope of this study....
-
Some existing measurement protocols
Some people use spot elevations, some use a 10 - foot straightedge, some use a 2 - foot digital inclinometer, while others may use special devices that measure slopes in 1 - foot increments...
-
II. ACTIONS TO BE TAKEN BY PALACE SPORTS AND ENTERTAINMENT, LLC:
accessibility in restrooms on all levels, improving accessibility and service in restaurants and concession stands, adding additional signage, providing additional assistive listening devices...
-
11B-1002.4.3 Gaps
Exception: Where compliance is not operationally or structurally feasible, ramps, bridge plates, or similar devices complying with the applicable requirements of 36 CFR 1192.83(c) shall...
-
11B-1002.4.3 Gaps
Exception: Where compliance is not operationally or structurally feasible, ramps, bridge plates, or similar devices complying with the applicable requirements of 36 CFR 1192.83(c) shall...
-
106.5.25 Disproportionality
installing accessible faucet controls; (iii) Costs associated with providing accessible telephones, such as relocating the telephone to an accessible height, installing amplification devices...
-
1002.4.3 Gaps
EXCEPTION: Where compliance is not operationally or structurally feasible, ramps, bridge plates, or similar devices complying with the applicable requirements of 36 CFR 1192.83(c) shall...
-
206.3 Location
For transportation facilities subject to Department of Transportation regulation 49 CFR 37.21, elements such as ramps, elevators, or other circulation devices, fare vending or other ticketing...
-
703.4.2 Location
EXCEPTION: Signs with tactile characters shall be permitted on the push side of doors with closers and without hold-open devices....
- Westchester Independent Living Center (WILC) - White Plains, NY
-
Dubai Company Formation Complete Guide for Entrepreneurs
technology; the Dubai International Financial Centre (DIFC), the leading financial hub for the Middle East, Africa, and South Asia; Jebel Ali Free Zone (JAFZA), which is ideal for logistics, manufacturing...
-
Section 1193.43 Output, display, and control functions [1193.37 in the NPRM] (Section-by-Section Analysis)
this section, the Board sought comment (Question 10) on whether moving the requirements of paragraphs (b)(9) and (b)(10) to a different section would be less confusing to designers and manufacturers...
-
VII. Effective Date
Manufacturers of Section 255-covered telecommunications equipment and customer premises equipment need not comply with the Board’s revised 255 Guidelines until incorporated into revised...
-
B. Proposed 255 Guidelines
Requirement for RTT functionality: Just as the proposed 508 Standards would require federal agencies to offer RTT functionality in certain ICT, the proposed 255 Guidelines would require the manufacturers...
-
Selection of Trail Surface Materials
materials (eight organic or natural by-product soil stabilizers, and three aggregate surfaces) were chosen based on their compatibility with existing soil and/or aggregate composition, and the manufacturer’s...
-
2.1 Participants’ Vision
The chart was illuminated uniformly according to the instructions provided by the manufacturer. Figure 6 shows the distribution of participants’ contrast sensitivity scores....
-
Appendix E: Vision Tests
The book of test plates was viewed on a dedicated easel under simulated daylight illumination as recommended by the manufacturer....
- Avenues