Hello. Please sign in!

Common Problems Arising in the Installation of Accessible Pedestrian Signals

Issue 9: Reach (how far?)

APS devices can be located in landscaped areas if the pushbutton is reachable from a level paved area. Figure 12 shows a location where new APS (and new sidewalks) were installed, but the APS are not usable. Besides the inaccessibility for wheelchair users, a person who is blind will have difficulty finding and getting to the pushbutton, even with the pushbutton locator tone sounding. 

Remedy: Installation in landscaped areas must be carefully planned and monitored for accessibility. APS should be within the reach range (1.2 m/48 inches vertically, .25m/10 inches horizontally) for an individual who uses a wheelchair (draft PROWAG, R404). The APS shown in Figure 13 are appropriately located within the landscape strip, reachable from a paved level surface, and aligned with the crosswalk lines.

[MORE INFO...]

*You must sign in to view [MORE INFO...]