Verify if under-slab plumbing will provide adequate clearances from finished walls. 11B-604.2 Site Lighting shall be capable of providing a minimum...
Search Results "Minimum Dimension"
Commonly Searched Documents
-
Rough Grade Site Inspection
-
II. REMEDIAL ACTION
Isolated or temporary interruptions in service due to maintenance or repairs are permissible, but Lewisboro agrees to keep these to a minimum. See 28 C.F.R. § 35.133. ...
-
1017.4 Passing Spaces
Entities should consider providing either a 60 inches (1525 mm) minimum clear tread width or passing spaces at shorter intervals if the clear tread width is less than 60 inches (1525 mm)...
-
608.6 Shower Spray Unit and Water
A shower spray unit with a hose 59 inches (1500 mm) long minimum that can be used both as a fixed-position shower head and as a hand-held shower shall be provided....
-
2.2.4 Maneuverability
Widths of the restricted space were set at a minimum of 750 mm (30 in.) for the 90-degree turn, 750 mm (30 in.) passage width for the U-turn with a barrier, and 1300 mm (51 in.) for the...
-
10 - foot straightedge method
When the 10 - foot straightedge method is used for random traffic floors, ACI 117 sets the minimum number of samples required at 0.01 times the floor area, measured in square feet....
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
11B-505.10.3 Bottom extension at stairs
The horizontal extension of a handrail shall be 12 inches (305 mm) long minimum and a height equal to that of the sloping portion of the handrail as measured above the stair nosings....
-
1009.7.2 Separation
Exterior walls separating the exterior area of assisted rescue from the interior of the building shall have a minimum fire-resistance rating of 1 hour, rated for exposure to fire from the...
-
11B-608.5.2 Standard roll-in type shower compartments
standard roll-in type shower compartments, the controls, faucets, and the shower spray unit shall be located on the back wall of the compartment adjacent to the seat 16 inches (406 mm) minimum...
- Airforce Hi-Speed Energy Efficient Hand Dryer
- Delta Single Handle Lavatory Faucet with Touch2O.xtâ„¢ Technology 592T-DST
- Salsbury Industries Designer Wood Locker Six Tier Box Style 1 Wide
- Pilot Rock End Accessible Multi-Pedestal Table APT Series 3"x4" Recycled Plastic
- Salsbury Industries Designer Wood Locker Six Tier Box Style 3 Wide
- Allegion Von Duprin 55 Series Cross Bar Exit Devices
- Delta Single Handle Lavatory Faucet with Touch2O.xtâ„¢ Technology 538T-DST
- AJW Architectural Products US130-A Series US130-A12 12" Exposed Flange, 1.5" Diameter Security Grab Bar - Configuration A
- Hamilton CapTel Captioned Telephone
- seca 684 r Digital Multifunctional Scale with Integrated RS232 Interface
- Mannington Mills Palma Collection Commercial Carpet
- Mannington Mills Vivendi Collection Commercial Carpet
- Halsey Taylor Bi-Level Barrier-Free Cooler