telephone which is not a single integrated text telephone pay phone unit will require a shelf large enough (10 in (255mm) wide by 10 in (255 mm) deep with a 6 in (150 mm) vertical clearance minimum...
Search Results "Minimum Dimension"
Filters
Commonly Searched Documents
-
A4.31.9 Text Telephones
-
7.2.2.1 Determining Impracticability
The minimum trail width is 12 inches (305 millimeters) or less for a distance of at least 20 feet (6100 mm). Limiting Factor 4. ...
-
1017.5 Tread Obstacles
Where possible, tread obstacles that cross the full width of the trail tread should be separated by 48 inches minimum so individuals who use wheeled mobility devices can cross the obstacle...
-
Legal Authority and Purpose
for the design, construction, and alteration of facilities covered by the Architectural Barriers Act.2 We are required by section 502 of the Rehabilitation Act to establish and maintain minimum...
-
Pictograms and Symbols of Accessibility [ADA Standards §216.2 , §703.6, §703.7]
directional signs must comply with requirements for finish and contrast but are not required to include the verbal equivalent in raised and braille characters or to be located on a 6” minimum...
-
Location [§208.3]
The minimum number must still be determined separately for each parking facility....
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
TABLE 11B-404.2.4.2 MANEUVERING CLEARANCES AT DOORWAYS WITHOUT DOORS OR GATES, MANUAL SLIDING DOORS, AND MANUAL FOLDING DOORS Minimum Maneuvering Clearance...
-
11B-505.10.3 Bottom extension at stairs
The horizontal extension of a handrail shall be 12 inches (305 mm) long minimum and a height equal to that of the sloping portion of the handrail as measured above the stair nosings....
-
11B-606.3 Height
In residential dwelling unit kitchens, sinks that are adjustable to variable heights, 29 inches (737 mm) minimum and 36 inches (914 mm) maximum, shall be permitted where rough-in plumbing...
-
11B-221.4 Designated aisle seats
Only when all seats on Aisle A would not meet the five percent minimum would seats on Aisle B be designated....
-
11B-235.2.1 Dispersion
Where the minimum number of boat slips required to comply with Section 11B-1003.3.1 has been met, no further dispersion shall be required....
-
11B-239.3 Miniature golf course configuration
Where only the minimum 50 percent of the holes are accessible, an accessible route from the last accessible hole to the course exit or entrance must not require travel back through other...
-
11B-233.3.4 Alterations
residential dwelling unit, the entity shall be permitted to alter or construct a comparable residential dwelling unit to comply with Sections 11B-809.2 through 11B-809.4 provided that the minimum...
-
11B-404.2.4.2 Doorways without doors or gates, sliding doors, and folding doors
TABLE 11B-404.2.4.2 MANEUVERING CLEARANCES AT DOORWAYS WITHOUT DOORS OR GATES, MANUAL SLIDING DOORS, AND MANUAL FOLDING DOORS MINIMUM MANEUVERING CLEARANCE...
-
11B-239.3 Miniature golf course configuration
Where only the minimum 50 percent of the holes are accessible, an accessible route from the last accessible hole to the course exit or entrance must not require travel back through other...
-
11B-235.2.1 Dispersion
Where the minimum number of boat slips required to comply with Section 11B-1003.3.1 has been met, no further dispersion shall be required. Advisory 11B-235.2.1 Dispersion....
-
1132A.3 Width and height of interior doors and secondary exterior doors
The width of any component in the means of egress system shall not be less than the minimum width required by Section 1005....
-
11B-606.3 Height
In residential dwelling unit kitchens, sinks that are adjustable to variable heights, 29 inches (737 mm) minimum and 36 inches (914 mm) maximum, shall be permitted where rough-in plumbing...
-
11B-703.7.2.6 Toilet and bathing facilities geometric symbols
Geometric symbols at entrances to toilet and bathing rooms shall be mounted at 58 inches (1473 mm) minimum and 60 inches (1524 mm) maximum above the finish floor or ground surface measured...
-
11B-221.4 Designated aisle seats
Only when all seats on Aisle A would not meet the five percent minimum would seats on Aisle B be designated. ◼...
-
Toilet Buildings and Pit Toilets
If there are sturdy walls around the pit toilet riser, standard riser dimensions, placement, and grab bars are required as shown in ABAAS, sections 603, 604, and 609....
-
AVAILABLE DATA DO NOT SUPPORT DEPARTING FROM THE CURRENTLY ACCEPTED STANDARD OF 19-INCH TRANSFER SURFACE HEIGHT
There is a recognized international standard defining various measurements of wheelchairs: ISO 7176-7:1998 Wheelchairs — Part 7: Measurement of seating and wheel dimensions....
-
1.1.2 Purpose
The purpose of this code is to establish the minimum requirements to safeguard the public health, safety and general welfare through structural strength, means of egress facilities, stability...
-
11B-224.8.2 More than 50-bed facilities
In sleeping rooms with more than 25 beds covered by this part, a minimum of 5% of the beds shall have clear floor space complying with section 806.2.3 of the 2010 Standards....