The physical dimensions and operational characteristics of Segway device users were measured and collected along with all the other trail users....
Search Results "Minimum Dimension"
-
Segway Human Transporter
-
903 Benches
In addition, clarification has been added that the dimensions for back support are measured from the surface of the seat. Comment....
-
How to Measure Transfer Surface Height
Because of these complex shapes, it is necessary to create a standard method by which to measure table seat dimensions....
-
References
Stoudt H, Damon A, McFarland, and Roberts J (1965) Weight, Height, and Selected Body Dimensions of Adults, United States, 1960‒1962....
-
4.3.2 Seat Height
4.3.2 Seat Height Seat height is an important dimension for establishing the height of built-in seating, toilet heights, tub heights, shower seat heights and other transfer related surfaces...
-
Definition of "wheelchair.'' (Section-by-Section Analysis)
Most business commenters wished the definition of ‘‘wheelchair'' had included size, weight, and dimension maximums....
-
4.4 Knee and Toe Clearances
Knee Clearance Height Note: DETR (U.K.) values are estimates * One outlier from IDEA Center data removed because the wrong dimension was originally reported....
-
Section 36.311 Mobility Devices (Section-by-Section Analysis)
The dimensions, weight, and other characteristics of the mobility device in relation to a wheelchair or scooter, as well as the device's maneuverability and speed, may be considered. ...
-
11B-1002.4.4.3 Permitted protrusions in wheelchair spaces
Objects are permitted to protrude a distance of 6 inches (152 mm) maximum along the front of the wheelchair space, where located 9 inches (229 mm) minimum and 27 inches (686 mm) maximum...
-
1002.4.4.3 Permitted Protrusions in Wheelchair Spaces
Objects are permitted to protrude a distance of 6 inches (150 mm) maximum along the front of the wheelchair space, where located 9 inches (230 mm) minimum and 27 inches (685 mm) maximum...
-
303.3 Beveled
Changes in level between ¼ inch (6.4 mm) high minimum and ½ inch (13 mm) high maximum shall be beveled with a slope not steeper than 1:2. Advisory 303.3 Beveled....
-
502.6 Identification
Signs shall be 60 inches (1525 mm) minimum above the finish floor or ground surface measured to the bottom of the sign. [ECTCR UFAS 4.6.4] Advisory 502.6 Identification....
-
Accessible Routes
The accessible route must comply with ADAAG provisions for the location, width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level...
-
Accessible Routes
Accessible route requirements in ADAAG address width (minimum of 36 inches), passing space, head room, surface, slope (maximum of 1:12 or 8.33%), changes in level, doors, egress, and areas...
-
Cashier counters
Provide a section of counter that is a minimum of 36" wide by a maximum of 36" high or an auxiliary accessible counter at the following locations: i....
-
Wheelchair Storage Space
The space must be a minimum of 30 inches by 48 inches. For safety reasons, this space may not overlap any required means of egress or an accessible route....
-
5.8.3 Breast Platform Recommendations
The height of the breast platform shall be 30 inches high minimum and 42 inches high maximum above the floor when in use by a patient seated in a wheelchair...
-
R309.3 Perpendicular or Angled Parking Spaces
Where perpendicular or angled parking is provided, an access aisle 2.4 m (8.0 ft) wide minimum shall be provided at street level the full length of the parking space and shall connect to...
-
1132A.6 Closer-effort to operate doors
When fire doors are required, the maximum effort to operate the door may be increased to the minimum allowable by the appropriate enforcement agency, not to exceed 15 pounds (66.7 N)....
-
407.12.2.2 Obstructed Side Reach (Section-by-Section Analysis)
operable part is located more than 10 inches, but not more than 24 inches, behind the vertical reference plane, the height of the operable part must be 46 inches maximum and 15 inches minimum...
-
4.10.13* Car Position Indicators
Numerals shall be a minimum of 1/2 in (13 mm) high. The audible signal shall be no less than 20 decibels with a frequency no higher than 1500 Hz....
-
10.3.1(16)
(16) Where provided in below grade stations, escalators shall have a minimum clear width of 32 inches....
-
General [5.1]/ Access Aisles [5.3]
The required clear width (36 inches minimum) is specified for the clearance between the edges of fixed tables or between table edges and walls....