A folding or non-folding seat shall be provided in transfer type shower compartments....
Search Results "Outdoor Rinsing Shower"
Commonly Searched Documents
-
608.4 Seats
- Access Board: Alternate Type Roll In Shower Stalls
-
1016.6 Openings
Openings in the surface of outdoor recreation access routes shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1016.6 Openings. ...
-
1016.6 Openings
Openings in the surface of outdoor recreation access routes shall not allow the passage of a sphere more than 1/2 inch (13 mm) in diameter. Advisory 1016.6 Openings....
-
1011.2 Clear Ground Space
A clear ground space complying with 1011.2 shall be provided at outdoor constructed features....
-
Shower/Tub Seat Mounting Location
I encountered this shower/tub seat in a hotel bathroom....
-
Providing Comforts and Conveniences—Constructed Features
rinsing showers....
- Pilot Rock Varmint Defiant Trash Can Cover Test
-
Pilot Rock Oak Knoll Collection Trash Receptacle
Requires the Registered User plan or above. Login!
- Pilot Rock Accessible Park Site Amenities
- Pilot Rock Bear Proof Receptacle vs Grizzly Bear
- Moen® Chrome PosiTemp® Shower Kit Informational Video
-
Viewing Areas [F246.3]
Within viewing areas, at least 20 percent, but no less than one, of each type of outdoor constructed feature must comply with the applicable technical requirements for the feature....
-
1134A.6, Item 1.3
1.3 Other shower stall configurations shall measure at least 36 inches deep by 60 inches wide (914 mm by 1524 mm) with an entrance opening of at least 36 inches (914 mm) when a wall is...
-
1134A.6, Item 1.3
Other shower stall configurations shall measure at least 36 inches deep by 60 inches wide (914 mm by 1524 mm) with an entrance opening of at least 36 inches (914 mm) when a wall is installed...
-
1011.2 Clear Ground Space
This section requires a clear ground space to be provided at outdoor constructed features and includes specific provisions for the size and location (1011.2.1), surface (1011.2.2), slope...
-
1134A.6, Item 1.2
1.2 The shower stall shall measure at least 30 inches deep by 60 inches wide (762 mm by 1524 mm) with an entrance opening of at least 60 inches (1524 mm)....
-
610 Seats
Requirements for bathtub and shower seats are provided in section 610. Comment. Specifications are provided for rectangular and L-shaped shower seats (610.3)....
-
2.9 Protruding Objects
Constructed features, including signs, water sources, and so forth shall not extend into the space above an ORAR more than 4 inches (100 mm) if they are between 27 inches (685...
-
608.4 Seats (Exception)
608.4 Seats (Exception) This section requires a folding or non-folding seat to be provided in transfer type shower compartments....
-
4.21.3 Seat
Seats are only required in transfer showers, which were not used in any of the designs reviewed....
-
11B-604 Water closets and toilet compartments
INTERPRETATION Showers are fixtures including a 30 inch x 60 inch clear receptor with a minimum/maximum slope of ¼ inch per foot to a drain (refer to CPC Section 408.5 and CBC Section...
-
608.1 General
Shower compartments shall comply with 608. Advisory 608.1 General....
-
608.1 General
Shower compartments shall comply with 608. Advisory 608.1 General....