Medical diagnostic equipment is typically designed to support patients in certain positions....
Search Results "Positioning Support"
-
4. Organization of Technical Criteria
-
Armrests M302.3.2
If provided armrests cannot interfere with transfer supports during the transfer....
-
Transfer Surface (M301.2 and M302.2)
The technical criteria do not address the overall width and depth of patient support surfaces because of the diverse shape and size of these surfaces....
-
5.2.1.3 Transfer Surface Size Recommendations for Stretchers (M301)
An important element is the position at which the patient transfers onto the stretcher. The point of entry to the equipment is in the center....
-
Q4. If someone's dog calms them when having an anxiety attack, does this qualify it as a service animal?
The ADA makes a distinction between psychiatric service animals and emotional support animals....
-
407.4.8 Car Position Indicators
407.4.8 Car Position Indicators. Audible and visible car position indicators shall be provided in elevator cars....
-
F243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with 1010....
-
243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with 1010....
-
5.2 Transfer Surface Size for Equipment Used by Patients in Supine, Prone, or Side-Lying Position
5.2 Transfer Surface Size for Equipment Used by Patients in Supine, Prone, or Side-Lying Position....
-
M301.2.3 Transfer Sides
This places the position at a desirable location along the length of the stretcher side so as when the transfer is completed, the patient is in the correct location relative to the articulation...
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with 1010....
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
11B-243.1 General
Where shooting facilities with firing positions are designed and constructed at a site, at least 5 percent, but no fewer than one, of each type of firing position shall comply with Section...
-
19 Inch Low Height
This memorandum presents the factors that support a minimum standard of 19 inches as the highest point on the transfer surface in a table or chair’s lowest adjustable position....
-
Location: ADA Standard Section 407.4.8.1.2
Section 407.4.8.1.2 covers the current ADA Standards for the location of visible elevator car position indicators.
-
Frequency: ADA Standard Section 407.4.8.2.3
Section 407.4.8.2.3 covers the current ADA Standards for the frequency of audible elevator car indicators.
-
11B-407.4.8.2.3 Frequency
The verbal annunciator shall have a frequency of 300 Hz minimum to 3000 Hz maximum.
-
11B-407.4.8.1.2 Location
Indicators shall be located above the car control panel or above the door.
-
11B-407.4.8.2.3 Frequency
The verbal annunciator shall have a frequency of 300 Hz minimum to 3000 Hz maximum.
-
11B-407.4.8.1.2 Location
Indicators shall be located above the car control panel or above the door.
-
§ 36.304(d)(2)(iii)(K)
(K) Shooting facilities with firing positions, sections 243 and 1010....
-
407.4.8 Car Position Indicators
Audible and visible car position indicators shall be provided in elevator cars....
-
407.4.8 Car Position Indicators
Audible and visible car position indicators shall be provided in elevator cars....