They can choose which position they prefer: on their back, belly, or sitting on the ground and leaning against the seat....
Search Results "Patient in Side-Lying Position"
Filters
Commonly Searched Documents
-
Kompan, Inc. Hammock ELE400006
-
Avoid the extremes of surface reflectivity and contrast (slides 11 and 13)
So maybe in that black stairwell you missed, if it had been a contrasting color on the side, you would see that depth on each step....
-
Providing Comforts and Conveniences—Constructed Features
Clear floor or ground space is required around the usable sides of each constructed feature, but the size of the clear space varies with the feature....
-
221 Assembly Areas
In row seating, two wheelchair spaces shall be permitted to be located side-by- side....
-
Entrances
provide a minimum width of 32 inches and there must also be enough room for a person using a wheelchair to maneuver to open the door, including 18 inches of clear space beyond the latch side...
-
1115B.3.2, Item 3
The centerline of the water closet fixture shall be18 inches (457 mm) from the side wall or partition....
-
R208 Detectable Warning Surfaces (Section-by-Section Analysis)
the edges of the boarding platform are not protected by screens or guards; and Boarding and alighting areas at sidewalk or street level transit stops for rail vehicles where the side...
-
2. Typical Issues for People Who are Blind or Have Low Vision
Objects that are wall mounted, that project into a pedestrian route from the side, or that are overhead must be located so that individuals who are blind or have low vision will either detect...
-
Part 2. Typical Issues for Voters Who are Blind or Who Have Low Vision
Objects that are wall-mounted, that project into a pedestrian route from the side, or that are overhead must be located so that voters who are blind or who have a visual impairment will...
-
Clarity AL12 Visual Alert System
Various accessories allow you to customize the system for your specific household or lifestyle needs Large, brightly lit icons and lights are sized and positioned for optimum visibility...
-
Reach Range
A specification that these controls be to the side of the door has been removed in the final rule as unnecessarily restrictive....
-
Sections 4.8.5 and 4.9.4
Section 505.6 requires handrail gripping surfaces to be continuous along their length and not to be obstructed along their tops or sides....
-
611 Washing Machines and Clothes Dryers
This dimension stems from specifications for obstructed side reaches (308.3)....
-
Power-Operated Doors or Gates
Those with doors or gates on opposing sides generally facilitate lift use by permitting a forward approach to both entry and exit doors or gates....
-
Installation Issues
Braille (right side up!) Issue 11. Good vibrations (vibrotactile indications) Issue 12. Audible beaconing Issue 13. Stub poles Issue 14....
-
Q3.) What are the types of “manufacturing processes” that were anticipated where the advisory says “tolerances recognized by this provision include… “those that may be a necessary consequence of a particular manufacturing process”?
To simplify the tolerance assessment, the 2010 Standards specify that the shower compartment be measured at the center points of opposing sides but the expectation is that the width at the...
-
Submerged Depth
Adding a solid wall on the side closest to the water can enhance safety....
-
R306.3 Roundabouts
Pedestrian street crossings at roundabouts can be difficult for pedestrians who are blind or have low vision to identify because the crossings are located off to the side of the pedestrian...
-
Areas of sport activity. (Section-by-Section Analysis)
In court sports, the accessible route would also have to directly connect both sides of the court. ...
-
H29
If a coat hook is provided is it mounted no higher than 54 inches above the floor for a side approach or 48 inches above the floor for a front approach?...
-
1009.4.5 Grab Bars
Where one grab bar is provided, clearance shall be 24 inches (610 mm) minimum on both sides of the grab bar....
-
406.7 Islands
Raised islands in crossings shall be cut through level with the street or have curb ramps at both sides....
