For example, for the 24x48 tables, you must check box the 48 under "width" and 24 under "length" and click search....
Search Results "Ramp Width"
Commonly Searched Documents
-
Diversified Woodcrafts Oak Table with Book Compartments 24x48
- Beneficial Designs The Universal Trail Assessment Process (UTAP)
- Door King Inc. 6050 / 6100 Residential and Commercial Swing Gate Operator
- Panda US-51 All Aluminum ULTRA Folding Door System
-
Vertical Dispersion: ADA Standard Section 221.2.3.2
Section 221.2.3.2 covers scoping requirements in the current ADA Standards for vertical dispersion in assembly areas.
-
B. Survey and Review of Polling Place Locations
., width of parking space, slope of curb ramp); (2) photographs of each element of the polling place and of each measurement; (3) the identification of all appropriate remedial measures,...
-
TABLE OF CONTENTS
308 Reach Ranges 309 Operable Parts CHAPTER 4: ACCESSIBLE ROUTES 401 General 402 Accessible Routes 403 Walking Surfaces 404 Doors, Doorways, and Gates 405 Ramps...
-
What is a “reasonable accommodation”?
His employer installed a ramp at the entrance to the building in which the editor worked so that the editor could use his scooter at the office....
-
Issue: Program Accessibility
A ramp was installed to provide access to the city activities conducted in this facility....
-
What values are recommended for ground and floor surfaces along an accessible route?
coefficient of friction for surfaces along an accessible route, when measured by the NBS-Brungraber machine using a silastic sensor shoe, were approximately 0.6 for a level surface and 0.8 for ramps...
-
R208 Detectable Warning Surfaces (Section-by-Section Analysis)
Detectable warning surfaces must be provided at the following locations on pedestrian access routes and at transit stops: Curb ramps and blended transitions at pedestrian street...
-
R204 Pedestrian Access Routes (Section-by-Section Analysis)
Where an overpass, underpass, bridge, or similar structure is designed for pedestrian use only and the approach slope to the structure exceeds 5 percent, a ramp, elevator, limited use/limited...
-
Additional Design Specifications for Requirement 1
Other commenters stated that the 10% slope criterion for the planned walkway was inconsistent with accessibility requirements that prohibit ramps from having a slope in excess of 8.33%....
-
Scoping [4.1.3(5)]
Vertical access by other means (ramp or lift) is not required to upper stories in exempt facilities....
-
11B-216.6 Entrances
accessible route diverges from the route for the general public and should be located at decision points (for example where the path to the stairs diverges from the path to an elevator or ramp...
-
Road Roughness Analysis
WT also addresses the issue of lost time information, which occurs in PSD analysis, by using short width and long width windows at high and low frequencies respectively....
-
4.4 Knee and Toe Clearances
620-640 X 500-650 Reduction Angle 1:6 X X X Width...
-
C. Raised Porches Are Part Of the Store That Must Be Made Accessible and Located On An Accessible Route
compliant walking surfaces, slopes no greater than 1:20 in the direction of travel and cross slopes no greater than 1:48, vertical changes in level no higher than ¼”, and sufficient clear width...
-
Comparison of Single-User Toilet Room Layouts: 2A, 2B, and 2C
Depending on the width of the hallway and other circulation issues, it can be preferable to swing the entry door into the toilet room....
-
Water Closet Clear Floor Space in Toilet Compartments
The proposed rule also allowed a minimum width for the clearance of 48 inches instead of 60 inches where a lavatory overlaps the space, regardless of the approach (1102.11.5.2)....
-
Overview
For example, on or after March 15, 2012, reservations staff (of a hotel or a third party) will be required to identify accessible features in guest rooms (e.g. guest room door widths and...
-
2. New Construction and Alterations
It is not enough to simply show that a particular bathroom stall, for example, is less than the required width. The approximate extent of any shortfall must be proven....
-
1. Abdomen depth (AD)
., combinations of knee clearance height or depth, foot clearance height or depth, occupied width, etc.) then a multivariate analysis which involves simultaneous consideration of multiple...
-
704.11 Parapets
the roof/ceiling framing elements are parallel to the walls, such framing and elements supporting such framing shall not be of less than 1-hour fire-resistance-rated construction for a width...