We found that RMS acceleration and subjective feedback is correlated to surface roughness. The engineered surfaces gave results that were much more linear than the outside surfaces....
Search Results "End Transfer Surface"
-
4. Implications for Standards
-
I. Required Survey Tools
following tools will be required to allow you to accurately complete the ADA Checklist for New Lodging Facilities: A. 12' Stiff Metal Tape Measure B. 24" Long Builders' Level (Square Edged Ends...
-
M20
Is there a horizontal grab bar at least 36 inches long securely mounted behind the toilet 33 to 36 inches above the floor with one end no more than 6 inches from the side wall?...
-
(1)(e)
(e) Doorways on the end of the enclosure, opposite the water closet, should have a minimum clear opening width of 32 inches (815 mm)....
-
Grab Bars [4.20.4] and Controls [4.20.5]
Tracks on the tub rim are not allowed as they can interfere with the transfer to tub seats. Dual grab bars on the back wall are needed for transfer to the seat and into the tub....
-
Pool Lifts: ADA Standard Section 1009.2
Pool lift seats that consist of materials that resist corrosion and provide a firm base to transfer will be usable by a wider range of people with disabilities....
-
17. Q: Do I have to create another job for an employee who, because of disability, can no longer perform the essential functions of her job even with reasonable accommodation?
A municipal rule prohibiting transfers between different municipal personnel systems does not automatically constitute an undue hardship....
-
Data analysis
Data analysis The number of subjects that attempted to perform each protocol and the number of subjects that were not able to attain the transfer(s) with that configuration are reported...
-
H22
Is a second horizontal grab bar at least 36 inches long securely mounted on the back wall with one end no more than 6 inches from the side wall 33 to 36 inches above the floor?...
-
M19
Is a horizontal grab bar at least 40 inches long securely mounted on the adjacent side wall 33 to 36 inches above the floor with one end no more than 12 inches from the back wall?...
-
§ 37.131(a)(1)(i)
The corridor shall include an area with a three-fourths of a mile radius at the ends of each fixed route....
-
NAADAC Webinar Series: "ADA: The Next Generation" - Virtual and At-Home Training
This unique and important series of seven webinars brings together some of the country’s most experienced ADA experts and trainers, combining the “official” view with practical...
-
Attachment A: Violations Identified in the United States' Letter of Findings (Sept. 29, 2014)
[See subsections ...]
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
11B-803.6 Mirrors
Mirrors shall be installed with the bottom edge of the reflecting surface 20 inches (508 mm) maximum above the finish floor or ground....
-
Accessible Route to Play Components
The remaining play components are permitted to be connected by a transfer system....
- American Specialties Stainless Steel Surface Mounted Paper Cup Dispenser 0002-SM
- American Specialties Turbo-Dri Jr. Surface Mounted High-Speed Dryer 0198
- AJW Architectural Products U156 32 oz. Vertical Soap Dispenser - Surface Mounted
- American Specialties Surface Mounted Twin Hide-A-Roll Toilet Tissue Dispenser 0030
- Bradley Surface Mounted Stainless Steel Single Roll Toilet Tissue Dispenser 5084
- American Specialties Roval™ Collection Surface Mounted Paper Towel Dispenser 20210
- Bradley Surface Mounted Chrome Plated Single Roll Toilet Tissue Dispenser 508
- Bobrick MatrixSeries Surface-Mounted Multi-Roll Toilet Tissue Dispenser B-5288