(III) reasonable accommodations or auxiliary aids or services; or...
Search Results "Positioning Aids"
Filters
Commonly Searched Documents
-
12102(4)(E)(i)(III)
-
§ 35.108(d)(4)(iii)
(iii) Reasonable modifications or auxiliary aids or services as defined in this regulation;...
-
H. MISCELLANEOUS
Per 28 CFR § 36.303(c)(1), the Cavs shall furnish appropriate auxiliary aids and services where necessary to ensure effective communication with individuals with disabilities....
-
Auxiliary Aids and Services
Auxiliary Aids and Services mm....
-
§1630.2(j)(5)(iii)
(iii) Reasonable accommodations or “auxiliary aids or services” (as defined by 42 U.S.C. 12103(1));...
-
III-4.3100 General
A public accommodation is required to provide auxiliary aids and services that are necessary to ensure equal access to the goods, services, facilities, privileges, or accommodations that...
-
M302.2.1 Height
The transfer surface is permitted to be positioned outside of the specified height range when not needed to facilitate transfer....
-
M305.2.8 Fittings (Section-by-Section Analysis)
Another commenter (manufacturer) pointed out that bed rails, which are common on hospital beds, require a latched position and an unlatched position, which allows them to rotate in their...
-
The Music of Life: Hearing Impairment PSA with Amanda Beers (Miss America Finalist)
Miss America finalist from Washington State, delivers an inspiring message to persons with hearing impairment in a public service video, made in partnership with Oticon (a leading hearing aid...
-
5.4.10 Transfer Support Fittings Recommendations for M301 and M302
When the transfer supports latch into a locked position, the transfer supports must meet the required load conditions without movement....
-
M101.2 Application
Where diagnostic equipment is designed to support more than one patient position, the standards for each patient position supported shall be applied to the equipment....
-
M305.4 Leg Supports
Leg supports shall provide a method of supporting, positioning, and securing the patient’s legs....
-
5.4.7 Transfer Support Gripping Surface Clearance Recommendation for M301 and M302
considering whether 1½ inches minimum clearance around the gripping surface would be appropriate for transfer supports on diagnostic equipment used by patients in a supine, prone, or side-lying position...
-
5.4.4 Transfer Support Distance from Transfer Surface Recommendations for M301 and M302
Surface Recommendations for M301 and M302 Description: This minimum distance ensures that the transfer support is within reach of the transfer surface and can be effectively used to position...
-
2.1.3 Receivers
2.1.3 Receivers The major advantage of IL systems is that they permit listeners whose hearing aids incorporate telecoils to use their own hearing aids as the receiver....
-
Section 36.303 Auxiliary Aids and Services (Section-by-Section Analysis)
Section 36.303 Auxiliary Aids and Services Section 36.303(a) of the 1991 title III regulation requires a public accommodation to take such steps as may be necessary to ensure that no...
-
III-4.3000 Auxiliary aids
[See subsections ...]
-
iv. Lifts
iv. Lifts Medical providers may need lifts to transfer some patients with mobility disabilities safely to examination or treatment tables or chairs or to gurneys or hospital beds....
-
5.2.1.1 Transfer Surface Width
The transfer surface should be 28 inches wide minimum for equipment used by patients in a supine, side-lying, or prone position....
-
5.2.1.2 Transfer Surface Depth
The transfer surface should be 17 inches deep minimum for all equipment used by patients in a supine, side-lying, or prone position with the exception of imaging equipment....
-
§8.4(b)(2)
(2) For purposes of this part, housing, aids, benefits, and services, to be equally effective, are not required to produce the identical result or level of achievement for individuals with...
-
5.2.1.4 Transfer Surface Size for Imaging Equipment
5.2.1.4 Transfer Surface Size for Imaging Equipment. The transfer surface should be 28 inches wide minimum and 21 inches deep minimum. The transfer surface should be located such...
-
M301.2.2 Transfer Surface Size
M301.2.2 Transfer Surface Size Subcommittee Recommendation: (Also agreed to by the full committee). A. The minimum size of the transfer surface is 28 inches wide minimum and 21...
-
M305.2.3 Height (Section-by-Section Analysis)
Additionally, for transfer surfaces that are greater than 24 inches deep, the MDE Advisory Committee recommended requiring a positioning support instead of a transfer support, with a height...
