The proposed rule included proposed scoping and technical requirements for utility sinks and pit toilets....
Search Results "Supplemental Requirement"
Commonly Searched Documents
-
Elements Exempted in Final Rule
-
M302.4 Lift Compatibility
EXCEPTION: Where diagnostic equipment meets the requirements of M303 and provides a folding seat, the equipment shall not be required to comply with M302.4....
-
11B-224.1.4 Guest room toilet and bathing rooms
Where toilet and bathing rooms are provided in guest rooms that are not required to provide mobility features complying with Section 11B-806.2, toilet and bathing fixtures shall only be...
-
11B-224.1.4 Guest room toilet and bathing rooms
Where toilet and bathing rooms are provided in guest rooms that are not required to provide mobility features complying with Section 11B-806.2, toilet and bathing fixtures shall only be...
-
Transfer Steps: ADA Standard Section 1009.5.4
Where possible, the height of the transfer step should be minimized to decrease the distance an individual is required to lift up or move down to reach the next step to gain access....
-
Height: ADA Standard Section 1005.2.1
or sections 1012.2 and 1012.3 of the International Building Code (2003 edition) (incorporated by reference, see “Referenced Standards” in Chapter 1) is provided, the guard shall not be required...
-
Clearance: ADA Standard Section 804.2
EXCEPTION: Spaces that do not provide a cooktop or conventional range shall not be required to comply with 804.2. Advisory 804.2 Clearance....
-
Assembly Area
For the purposes of these requirements, assembly areas include, but are not limited to, classrooms, lecture halls, courtrooms, public meeting rooms, public hearing rooms, legislative chambers...
-
11B-809.9.4 Work surfaces
Work surfaces shall be 36 inches (914 mm) maximum above the finish floor with minimum lengths at the following locations as required by this section: Linear length of 30 inches...
-
11B-809.9.1 Clear floor space
For a parallel or forward approach to the sink and to the work surface required by Sections 11B-809.9.3 and 11B-809.9.4....
-
11B-222.2 Coat hooks and shelves
shelves are provided in individual compartments at least one of each type complying with Section 11B-803.5 shall be provided in individual compartments in dressing, fitting, or locker rooms required...
-
BATHROOM
A compartmented bathroom is considered a single unit and is subject to the requirements of Chapters 11A and 11B....
-
11B-703.7.2.6.1 Men’s toilet and bathing facilities
Exception: Within secure perimeter of detention and correctional facilities, geometric symbols shall not be required to be ¼ inch (6.4 mm) thick....
-
11B-404.2.5 Thresholds
[2010 ADA Standards] EXCEPTION: Existing or altered thresholds ¾ inch (19 mm) high maximum that have a beveled edge on each side with a slope not steeper than 1:2 shall not be required...
- ThyssenKrupp Elevator Signa 4 Signal Fixtures
- Viking K-1600-EHFA Elevator Phone with Built-in Dialer and Digital Announcer
-
Section 35.151(b) Alterations
Proposed Sec. 35.151(b)(4) contained the requirements for path of travel....
-
Application of ADA to places of lodging that contain individually owned units. (Section-by-Section Analysis)
A number of commenters expressed concerns about the ability of the Department to require owners of accessible units to participate in the rental program, to require developers, condo associations...
- Rebuilding Together Baltimore - Baltimore, MD
- Renewing the Commitment: An ADA Compliance Guide for Nonprofits
- RESNA Standards Committee on Inclusive Fitness
- Michigan Rehabilitation Services (MRS)
- Rebuilding Together North Central Florida - Gainesville, FL
- Assisted Living Directory - Ohio Assisted Living Facilities & Senior Care