Exception:Â The triangular opening formed by the riser, tread and bottom rail at the open side of a stairway shall be of a maximum size such that a sphere of 6 inches (152mm) in diameter...
Search Results "Latch Side Clearance"
Commonly Searched Documents
-
1003.2.12.2 Opening limitations
-
Clear Deck Space
This space must be located on the side of the seat opposite the water. The slope of the clear deck space must not be greater than 1:48 (2%)....
-
R305.1.4 Size
At curb ramps and blended transitions, detectable warning surfaces shall extend the full width of the ramp run (excluding any flared sides), blended transition, or turning space....
-
704.11.1 Parapet construction
Parapets shall have the same fire-resistance rating as that required for the supporting wall, and on any side adjacent to a roof surface, shall have noncombustible faces for the uppermost...
-
11B-308.4 Suggested reach ranges for children
These dimensions apply to either forward or side reaches.  ...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
-
1132A.9 Smooth surface
Swinging door or gate surfaces within 10 inches (254 mm) of the finish floor or ground measured vertically shall have a smooth surface on the push side extending the full width of the door...
- Bradley 2-Stall Seat Cover/Tissue Dispenser & Napkin Disposal 5911
- Hager Companies Plastic International Symbol 364M
- Hager Companies Plastic International Symbol 364S
- Lynx Grills Inc. 36” Grill - 1 ProSear Burner & 2 Stainless Steel Burners (L600ADA)
- EZ Dock EZ Launch® System for Kayaks and Canoes
- Pilot Rock CN-Q/D-32/2 Square Trash Receptacle Expanded Steel
- Cybex Total Access Leg Extension Exercise Machine
-
Avoid the extremes of surface reflectivity and contrast (slides 11 and 13)
So maybe in that black stairwell you missed, if it had been a contrasting color on the side, you would see that depth on each step....
-
Providing Comforts and Conveniences—Constructed Features
Clear floor or ground space is required around the usable sides of each constructed feature, but the size of the clear space varies with the feature....
-
221 Assembly Areas
In row seating, two wheelchair spaces shall be permitted to be located side-by- side....
-
1115B.3.2, Item 3
The centerline of the water closet fixture shall be18
inches (457 mm) from the side wall or partition....
-
(4) Adjustability: Method of Measurement
The MDE NPRM proposed that the measurement of the height of the transfer surface for both diagnostic equipment used in the supine, prone, or side-lying position and diagnostic equipment...
-
R208 Detectable Warning Surfaces (Section-by-Section Analysis)
the edges of the boarding platform are not protected by screens or guards; and Boarding and alighting areas at sidewalk or street level transit stops for rail vehicles where the side...
-
2. Typical Issues for People Who are Blind or Have Low Vision
Objects that are wall mounted, that project into a pedestrian route from the side, or that are overhead must be located so that individuals who are blind or have low vision will either detect...
-
Part 2. Typical Issues for Voters Who are Blind or Who Have Low Vision
Objects that are wall-mounted, that project into a pedestrian route from the side, or that are overhead must be located so that voters who are blind or who have a visual impairment will...
-
Reach Range
A specification that these controls be to the side of the door has been removed in the final rule as unnecessarily restrictive....
-
Sections 4.8.5 and 4.9.4
Section 505.6 requires handrail gripping surfaces to be continuous along their length and not to be obstructed along their tops or sides....