Compliance in Construction Projects April 22, 2014 The ADA Standards issued by the Department of Transportation (DOT) apply to facilities used by state and local governments to provide designated...
Search Results "Franchise Design"
Filters
Commonly Searched Documents
-
Requirements to Remember for ADA Compliance in Construction Projects: Transportation Facilities
-
11B-502.7.1 Arrangement
Parking spaces and access aisles shall be designed so that persons using them are not required to travel behind parking spaces other than to pass behind the parking space in which they parked...
-
233.5 Apartments or Townhouse Facilities Provided By or on Behalf of A Place of Education
FHAA has dozens of stricter requirements than the ADA Standards for Transient Lodging facilities so dormitory facilities must be designed considering each of the stricter requirements of...
-
11B-505.4 Height
A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children....
-
T202 Accessible Means of Boarding and Alighting
All buses, OTRBs, and vans covered under the 2016 Non-Rail Vehicle Guidelines must provide at least one means of accessible boarding and alighting that serves all designated stops on the...
-
Who Should Read This Guide?
It is designed for easy use. The electronic version is available at http://www.westernu.edu/cdihp/links.htm....
-
iv. Lifts
Concerns about lifting injuries have given rise to proposed legislation at the federal and state levels designed to increase safety for patients and medical staff....
-
A4.31.9 Text Telephones
As currently designed pocket-type text telephones for personal use do not accommodate a wide range of users....
-
Limitations
Surfaces installed in other locations vary in terms of design parameters, frequency and type of use, site conditions, weather and climate; The sections of installed trail surface...
-
Stopping Sight Distance
In comparison, AASHTO currently recommends a stopping sight distance of 38.7 m (127 ft) for a bicyclist traveling at the recommended design speed of 30 km/h (20 mi/h) in a wet pavement condition...
-
Off-Road Racing Wheelchairs
Off-Road Racing Wheelchairs Off-road racing wheelchairs typically are designed for recreational use on mountain bike or single-track trails (figures 14 and 15)....
-
Treatment of Data
Treatment of Data The research design for this study was developed to collect data on trail surface conditions, evaluate individual surface performances over time, note deficiencies,...
-
Legal Authority and Purpose
Certain agencies are required to adopt accessibility standards for the design, construction, and alteration of facilities covered by the Architectural Barriers Act.2 We are required by section...
-
4.20.2 Floor Space
Therefore, residential tubs that are only accessed from one open side, were typically designed with one end against a wall and 3 open sides from which assistance could be provided....
-
FAQ: How do I enter ADA references in my Voices post?
accessibility-related material, it must have at least one ADA reference and one keyword to pull in other relevant information such as documents, products, how-to videos, expert opinions, design...
-
Detectable Warnings [§406.8 (DOT’s Standards), §705]
DOT’s Standards), §705] Detectable warnings are required on curb ramps at transit facilities covered by DOT’s Standards (facilities used by state and local governments to provide designated...
-
Fire Safety Evacuation Planning
These devices are designed with rollers, treads, and braking mechanisms that enable a person to be transported down stairs with the assistance of another person....
-
Stirrups (M301.3.2)
Comments are requested on the following questions regarding stirrups: a) What would be the incremental costs for the design or redesign and manufacture of stirrups that provide a method...
-
Appendix to Part 1193 — Advisory Guidance
They are meant to provide a useful starting point for evaluating the accessibility of a product or conceptual design and are not intended to inhibit innovation....
-
Additional Technical Criteria Considered for Handrails on Ramps
b) What would be the incremental costs for the design or redesign and manufacture of the equipment to provide handrails on diagnostic equipment ramps that conform to these technical criteria...
-
11B-502.7.1 Arrangement
Parking spaces and access aisles shall be designed so that persons using them are not required to travel behind parking spaces other than to pass behind the parking space in which they parked...
-
[F] 907.5.2.3.1 Public and common use areas
bathrooms and shower rooms Exception: Where employee work areas have audible alarm coverage, the notification appliance circuits serving the employee work areas shall be initially designed...
-
11B-404.3 Automatic and power-assisted doors and gates
Automatic and power-assisted doors are often used by designers to provide accessibility when door closer pressure would exceed the allowable opening force for interior or exterior doors....
-
1009.8 Two-way communication
Two-way communication systems are not required at the landings serving only service elevators that are not designated as part of the accessible means of egress or serve as part of the required...