(c) If you are a U.S. or foreign air carrier that operates at least one aircraft having a designed seating capacity of more than 60 passengers and owns or controls a primary Web site that...
Search Results "Franchise Design"
Filters
Commonly Searched Documents
-
§382.43(c)
-
Accessible Routes to Press Boxes
As a result, their design and location have posed unique challenges to the provision of a connecting accessible route....
-
Table Surface Height
Research on powered mobility aids the Board is currently sponsoring through the Rehabilitation Engineering Research Center on Universal Design will provide information on various fundamental...
-
6. Where multiple swings in a swing bay are provided, Section 240.2.1.1 (one of each type) requires one swing to be located on an accessible route. If an accessible route is provided to more than one swing, can each swing be counted as an accessible ground level play component? If one is an infant seat and another a sling seat, are those considered two different types?
Designers and play area operators may choose to provide these different types of swing seats to provide additional play opportunities to children of different ages, but the type is the same...
-
Accessible Routes
Accessible Routes An accessible route is a pathway specifically designed to provide access for individuals with disabilities, including those using wheelchairs or mobility devices....
-
1008.2.3 Water Play Components
Providing an aquatic wheelchair made of non-corrosive materials and designed for access into the water will protect the water from contamination and avoid damage to personal wheelchairs....
-
Registered Accessibility Specialist (RAS) Bulletin RAS 2012-02 Alterations Affecting Primary Function Areas
As a reminder, a RAS is prohibited by the RAS Procedures from registering a project online for an owner or designated agent without obtaining a PRF prior to registration....
-
Accessible Routes
Where possible, designers and operators are encouraged to make all holes accessible....
-
Why are surface characteristics specified?
The information in this Bulletin was derived from this and other research in order to provide designers with an understanding of the variables that affect the measurement and performance...
-
Toilet Rooms-Special Exhibit Space
The force required to push or pull open the men's and women's toilet rooms designated as accessible is 10 lbf, which exceeds the maximum allowable door opening force of 5 lbf....
-
5.4.10 Transfer Support Fittings Recommendations for M301 and M302
To be useful, transfer supports will be of varying configuration and designs. Some may be removable, some foldable or articulating....
-
232.2 General Holding Cells and General Housing Cells
Many detention and correctional facilities are designed so that certain areas (e.g., "shift" areas) can be adapted to serve as different types of housing according to need....
-
R302.6.1 Pedestrian Street Crossings Without Yield or Stop Control
Pedestrian street crossings without yield or stop control are crossings where there is no yield or stop sign, or where there is a traffic signal that is designed for the green phase....
-
Identification of accessible guest rooms. (Section-by-Section Analysis)
As a practical matter, a public accommodation's designation of a guest room as "accessible" will not necessarily ensure that the room complies with all of the 1991 Standards. ...
-
Purpose
In support of this effort, the Department is announcing its intention to adopt standards consistent with Parts I and III of the 2004 ADAAG as the ADA Standards for Accessible Design. ...
-
§ 382.43(c)
(c) If you are a U.S. or foreign air carrier that operates at least one aircraft having a designed seating capacity of more than 60 passengers and owns or controls a primary Web site that...
-
4. FACILITIES IN OTHER COUNTRIES
Facilities in other countries for which the United States contributes a portion of the construction cost but does not control design criteria (such as NATO-funded facilities) need not comply...
-
Reliance on Preamble to Guidelines
The Guidelines consist of recommended design specifications for compliance with the specific accessibility requirements of the Fair Housing Act....
-
505.4 Height
A maximum height of 28 inches (710 mm) measured to the top of the gripping surface from the ramp surface or stair nosing is recommended for handrails designed for children....
-
1008.2.3 Water Play Components
Providing an aquatic wheelchair made of non-corrosive materials and designed for access into the water will protect the water from contamination and avoid damage to personal wheelchairs....
-
Release of unsold accessible seats. (Section-by-Section Analysis)
Through its investigations, the Department has become familiar with the problem of designated accessible seating being sold to the general public before people who need accessible seating...
-
Section 2. Definitions
The inclusion of new definitions reflects the comments received, and also reflects new terms introduced by changes to certain of the Option One design specifications....
-
Purpose
In support of this effort, the Department is announcing its intention to adopt standards consistent with Parts I and III of the 2004 ADAAG as the ADA Standards for Accessible Design. ...
-
§8.56(a) Periodic compliance reviews
official shall include in normal program compliance reviews and monitoring procedures appropriate actions to review and monitor compliance with general or specific program requirements designed...